CEJN / Series 135 / 300 MPa

Description:

Series 135 / 300 MPa

Coupling Category

High Pressure Couplings

Manufacturer

CEJN

Series 135 is a CEJN original for extremely high working pressure, 300 MPa.
The series also withstands pressure up to 300 MPa while disconnected (applies to the coupling and nipple).
Non-drip connection and disconnection are standard on the CEJN high pressure range.
The coupling also has a safety ring for the locking sleeve to prevent accidental disconnection.
Plastic dust caps are standard on both coupling and nipple.
Swiveling can cause wear damage over time why the nipple is available in both swivel and non-swivel designs.
Each coupling and nipple are pressure tested up to full working pressure before delivery.
The series makes it possible to connect pumps and accessories faster, safer and more conveniently, even at extreme pressure.
The series is in the first place recommended for bearing pullers, splitters and hydraulic test installations.

Technical data
Material:
Hardened black finish steel
Max. working pressure:
300 MPa.
Min. bursting pressure:
600 MPa.
Nominal flow diameter:
2.5 mm (3/32")
Temperature range:
-20°C - +80°C (0°F - +175°F)
Flow capacity at pressure drop 0.4 MPa:
4.6 l/min (1.01 GPM UK)
Max. recommended number of pressure cycles
with nipple 10 135 6505: 1000.
with nipple 10 135 6506: 5000.


Couplings - Female thread with 60° sealing cone (interchangeable with both nipple designs)
Part No. Connection Length Dia. Hex. Con. stroke Weight Rec. torque (Nm)
10 135 1505 M16x1.5 64.0 30.0 22 20.6 210 40-50
Max. working pressure: 300 MPa
Min. bursting pressure:
600 MPa
Seal material: Nitrile rubber
Flow diameter:
2.5 mm (3/32")
Temperature range:
-20° C - +80° C (0°F - +175°F)
Max. no. of pressure cycles (to max. working pressure)
connected with -
nipple 10 135 6505: 1000
nipple 10 135 6506: 5000


Nipples - Female thread with 60° sealing cone Standard design 
Part No. Connection Length Dia. Hex. Con. stroke Weight Rec. torque (Nm)
10 135 6505 M16x1.5 55.3 25.0 22 - 125 40-50
Max. working pressure: 300 MPa
Seal material: Nitrile rubber
Min. bursting pressure: 600 MPa Flow diameter: 2.5 mm (3/32")
Temperature range: -20° C - +80° C (0°F - +175°F)
Max. no. of pressure cycles connected (to max. working pressure): 1000


Nipples - Female thread with 60° sealing cone Non-swivel design 
Part No. Connection Length Dia. Hex. Con. stroke Weight Rec. torque (Nm)
10 135 6506 M16x1.5 55.3 25.0 22 - 125 40-50
Max. working pressure: 300 MPa
Seal material: Nitrile rubber
Min. bursting pressure: 600 MPa Flow diameter: 2.5 mm (3/32")
Temperature range: -20° C - +80° C (0°F - +175°F)
Max. no. of pressure cycles connected (to max. working pressure): 5000
Non-swivel model. Six optional positions are possible when connecting.
CEJN / Series 135 / 300 MPa
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov