Bolted I-Line Clamps - 13ILB / Two bolt design
Description:
Bolted I-Line Clamps - 13ILB / Two bolt design
Coupling Category
I-line Clamps / Sanitary Couplings
Manufacturer
Bradford
Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets,
with proper installation of ferrules, assembly of joints and absence of shock pressure.
All ratings shown are dependent upon related components within the systems and proper installation.
For temperatures above 250°F, we recommend using only 13MHP clamps.
This information is only valid if Bradford™ clamps, ferrules and gaskets are used.
I-Line uses a male and female type connection which makes alignment easier.
Add a gasket from a number of elastomers and a special wing nut or bolted clamp to complete the connection.
This design has been preferred by the beverage industry for many years.
Dixon Sanitary offers a wide variety of I-Line fittings in 304 and 316L materials in sizes from 1" to 8".
All ratings shown are dependent upon related components within the systems and proper installation.
For temperatures above 250°F, we recommend using only 13MHP clamps.
This information is only valid if Bradford™ clamps, ferrules and gaskets are used.
I-Line uses a male and female type connection which makes alignment easier.
Add a gasket from a number of elastomers and a special wing nut or bolted clamp to complete the connection.
This design has been preferred by the beverage industry for many years.
Dixon Sanitary offers a wide variety of I-Line fittings in 304 and 316L materials in sizes from 1" to 8".
| Tube O.D. | Dimension A | Service Pressure Rating at 70°F * | Service Pressure Rating at 250°F * | Part Number |
| 6" | 7.689 | 300 PSI | 200 PSI | 13ILB600 |
| 8" | 9.689 | 250 PSI | 150 PSI | 13ILB800 |
* The nuts must be tightened to 20 ft.lbs.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |