Triplex Plunger Pump Solid Shaft 20 mm bore / 10 mm stroke

Description:

T Series 47 S

Coupling Category

Pressure Cleaning Pumps

Manufacturer

General Pump

T Series 47, Triplex Plunger Pump, Solid Shaft – Forged brass manifold with an exclusive lifetime warranty. Heavy-duty tapered roller bearings and oversized connecting rods for maximum life.

Features:
  • The preferred pump frame in the pressure cleaning industry
  • Forged brass manifold with an exclusive lifetime warranty
  • Large-capacity, die-cast, anodized aluminum oil-bath crankcase
  • Over-sized connecting rods for maximum life
  • Heavy-duty tapered roller bearing
  • Solid ceramic plungers with continuously lubricated packings
  • Unitized stainless steel inlet and discharge valves


Specifications
  • Max. Inlet Pressure: 125 PSI
  • Max. Fluid Temperature: 165° F
  • Inlet Port Thread: 1/2" - 14 BSP-F
  • Discharge Port Thread: 3/8" - 19 BSP-F
  • Shaft Diameter: .945 in./24 mm
  • Pump Dimensions: 12.2" x 9.2" x 6.9"
  • Max. Inlet Vacuum: 9 ft. water (7.9 in. Hg)
  • Crankcase Oil Capacity: 33.8 oz. Use GP Series 100 Oil
  • Product Group: X


GPM PSI RPM BORE STROKE HP SHP WGHT
TS1331 3.5 GPM 2100 PSI 1450 RPM .787 in./20 mm .394 in./10 mm 5.0 EBHP 32.0 lbs.
TS1011 4.0 GPM 2000 PSI 1450 RPM .787 in./20 mm .472 in./12 mm 5.5 EBHP 32.0 lbs.
TS1331 4.0 GPM 2000 PSI 1750 RPM .787 in./20 mm .394 in./10 mm 5.5 EBHP 32.0 lbs.
T1011 4.5 GPM 2000 PSI 1125 RPM .787 in./20 mm .630 in./16 mm 6.2 EBHP 32.0 lbs.
TS1011* 4.75 GPM 1500 PSI 1750 RPM .787 in./20 mm .472 in./12 mm 4.9 EBHP 32.0 lbs.
TS921 4.75 GPM 1800 PSI 1450 RPM .866 in./22 mm .472 in./12 mm 5.9 EBHP 32.0 lbs.
T921 5.0 GPM 1700 PSI 1050 RPM .866 in./22 mm .630 in./16 mm 5.8 EBHP 32.0 lbs.
T1011 5.6 GPM 1500 PSI 1450 RPM .787 in./20 mm .630 in./16 mm 5.8 EBHP 32.0 lbs.
*Pumps are available with 1" Gearbox for mounting to J609B gas engines.
Triplex Plunger Pump Solid Shaft 20 mm bore / 10 mm stroke
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov