Kuriyama - Series SDH SIL-Duct Silicone Ducting Hose
Vendor: Kuriyama
Category: Ducting
Application:
Silicone Coated, Two-Ply,
Woven Fiberglass Ducting Hose With
Chemically Treated Steel Wire Helix
- Ducting, ventilation & fume removal
- Dust control
- High temperature air handling
- Plastic processing dryers
FEATURES
- Silicone Coated, Woven Fiberglass Material – Vulcanized for high durability and long service life. Well suited for air handling and fume control at both high and low temperatures extremes.
- Smooth Air Flow with Minimum Friction Loss – Internal ply and narrow pitch helix allow for a tight bend radius while still maintaining smooth air flow. Other similar hoses create restricted inside diameter in bends or axial compression.
- Easy Installation – Light weight and highly kink resistant construction allows for easy installation in tight spaces requiring multiple bends.
- Steel Wire Helix – Highly durable steel wire provides strength and allows for use at higher temperatures without risk of hose deformation. Wire can be grounded for static dissipation.(CAUTION: This product is designed to dissipate static electricity when the metal wire is physically extracted and securely connected to ground, through the fitting or by other means.)
Tube:
Silicone Coated, Two-Ply, Woven Fiberglass
Reinforcement:
Steel Wire Helix and Double Continuous Filament, Dilicone Treated Fiberglass Cord.
Temperature:
-80°F (-62°C) to +500°F (+260°C); intermittent service to +600°F (+316°C)*
*Actual service temperature range is application dependent
Packaging:
Carton
Lengths:
12 ft. / Ctn
| Series | ID | Min. Bending Radius | Wall Thickness | Max. WP | Vacuum Rating | Max. Leakage | Cuff Length | Weight | Request a Quote | |
| at 68° F | at 68° F | at 68ºF | CFM | |||||||
| SDH-100X12 | 1 in | 25.4 mm | 1.0 in | 0.07 in | 60 psi | Full inHg | 0.015 ft³/min | 1 1/2 in | 0.13 lbs/ft | Request Quote |
| SDH-125X12 | 1 1/4 in | 31.7 mm | 1.3 in | 0.07 in | 60 psi | Full inHg | 0.015 ft³/min | 1 1/2 in | 0.16 lbs/ft | Request Quote |
| SDH-150X12 | 1 1/2 in | 38.1 mm | 1.5 in | 0.07 in | 55 psi | 26 inHg | 0.015 ft³/min | 1 1/2 in | 0.19 lbs/ft | Request Quote |
| SDH-175X12 | 1 3/4 in | 44.5 mm | 1.8 in | 0.07 in | 55 psi | 26 inHg | 0.020 ft³/min | 1 1/2 in | 0.22 lbs/ft | Request Quote |
| SDH-200X12 | 2 in | 50.8 mm | 2.0 in | 0.07 in | 50 psi | 20 inHg | 0.020 ft³/min | 1 1/2 in | 0.25 lbs/ft | Request Quote |
| SDH-250X12 | 2 1/2 in | 63.5 mm | 2.5 in | 0.07 in | 45 psi | 16 inHg | 0.025 ft³/min | 1 1/2 in | 0.31 lbs/ft | Request Quote |
| SDH-300X12 | 3 in | 76.2 mm | 3.0 in | 0.07 in | 45 psi | 14 inHg | 0.030 ft³/min | 1 1/2 in | 0.39 lbs/ft | Request Quote |
| SDH-350X12 | 3 1/2 in | 88.9 mm | 3.5 in | 0.07 in | 40 psi | 12 inHg | 0.035 ft³/min | 1 1/2 in | 0.45 lbs/ft | Request Quote |
| SDH-400X12 | 4 in | 101.6 mm | 4.0 in | 0.08 in | 40 psi | 10 inHg | 0.040 ft³/min | 1 1/2 in | 0.53 lbs/ft | Request Quote |
| SDH-450X12 | 4 1/2 in | 114.3 mm | 4.5 in | 0.08 in | 35 psi | 8 inHg | 0.050 ft³/min | 1 1/2 in | 0.60 lbs/ft | Request Quote |
| SDH-500X12 | 5 in | 107.0 mm | 5.0 in | 0.08 in | 35 psi | 8 inHg | 0.060 ft³/min | 2 in | 0.67 lbs/ft | Request Quote |
| SDH-600X12 | 6 in | 152.4 mm | 6.0 in | 0.09 in | 30 psi | 6 inHg | 0.100 ft³/min | 2 in | 0.81 lbs/ft | Request Quote |
| SDH-800X12 | 8 in | 203.2 mm | 8.0 in | 0.11 in | 15 psi | 6 inHg | 0.150 ft³/min | 2 in | 1.11 lbs/ft | Request Quote |
NOTE: Service life may vary depending on operating conditions and type of material being conveyed.
CAUTION: This product is designed to dissipate static electricity when the metal wire is physically extracted and securely connected to ground, through the fitting or by other means.
CAUTION: This product is designed to dissipate static electricity when the metal wire is physically extracted and securely connected to ground, through the fitting or by other means.
RoHS(06)
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |