Texcel - GAMMA™-HTA / Hot Tar and Asphalt Hose

GAMMA™-HTA / Hot Tar and Asphalt Hose

Vendor: Texcel

Category: Special Application


Application:

This rugged hose is specifically designed for the transfer of petroleumbased products such as high temperature asphalt, tar, and hot oils. Suitable for suction and discharge service on rail transport cars, tank trucks, bulk stations, storage tanks and disposing units.

SAFETY NOTE: Texcel recommends using Dixon Valve and Coupling’s Boss™ 4-Bolt Clamp System for Hot Tar and Asphalt hose. Please consult Dixon’s selection and installation recommendations, including bolt re-tightening procedures, to insure proper hose assembly.

Tube:

Black, special synthetic acrylic rubber, heat and abrasion resistant

Reinforcement:

High tensile tire cord plies; helix wire

Cover:

Black, CR anti-static, with a smooth abrasion, weather and heat resistant wrapped cover

Temperature:

-20°F to +350°F (Maximum service temp. 350°F, intermittent use only)

Branding:

TEXCEL® GAMMA™-HTA - HOT TAR & ASPHALT HOSE 150 PSI W.P.

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Options:

Cut Lengths Available.

Inside
Diameter
(in.)
Part
Number
Outside Diameter
(in.)
Standard
Length (ft.)
Working Pressure
(psi)
Vacuum (in./HG) Bend
Radius (in.)
Weight /
Foot (lbs.)
Request a Quote
2" GHTA15S1-2.0 2-46/64" 100'/200' 150 29 10" 1.80 Request Quote
3" GHTA15S1-3.0 3-50/64" 100'/200' 150 29 15" 2.94 Request Quote
4" GHTA15S1-4.0 4-51/64" 100'/200' 150 29 20" 3.89 Request Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov