New Age - Silbraid Medical Grade Reinforced Silicone Hose

Silbraid  Medical Grade Reinforced Silicone Hose

Vendor: New Age

Category: Special Application


Application:

Silbrade Medical a peroxide-cured product.
Not recommended for implantable or in-body use.

Tube:

Silicone Tubing

Reinforcement:

Open mesh polyester braiding

Cover:

Silicone elastomer

Temperature:

Brittle -80°F
Maximum operating temperature 350°F

Packaging:

Individual, non-sterile, heat-sealed polybags

Couplings:

Thermobarb® barbed fittings, Oetiker® ear type clamps, Kwik Clamp™ nylon double bond hose clamps, Worm gear clamps

Category:

Medical Grade

Colors:

Translucent

Options:

Custom Services: Cut, Size, Overbraid and More...



  • Open mesh polyester braiding incorporated within the walls of silicone tubing
  • Silicone elastomer meets USP Class VI requirements
  • Translucent natural color for visual contact with the flow
  • Able to resist extreme temperature variation: -80°F to 350°F
  • Odorless, tasteless, and inert
  • All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces
  • Manufactured under good manufacturing procedures in a controlled environment


Notes


SILBRADE MEDICAL’s construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good manufacturing procedures, including lot traceability, are applicable to all Class VI ingredients. SILBRADE MEDICAL is a peroxide-cured product. 

The hose’s smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging.

SILBRADE MEDICAL is not recommended for implantable or in-body uses.

SILBRADE MEDICAL may be low pressure sterilized in-line or autoclaved up to 250°F in a normal autoclaving cycle. If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.

Care is recommended in the selection and application of fittings and clamps, as sharp barbed fittings or unlined clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.

Peroxide-cured SILBRADE MEDICAL hose is supplied in individual, non-sterile, heat-sealed polybags and should be sterilized prior to use.

A platinum-cured, braid-reinforced medical grade silicone hose is available. Minimum quantities apply; call for price and delivery.



Physical Properties **

Hardness, Shore A ±5 – Core
Hardness, Shore A ±5 – Cover
Tensile Strength, psi
Elongation at Break, %
Brittle Temperature, °F
Maximum Operating Temperature, °F
70
60
1000
350
-80
350
** Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.


PART
NO.
ID
(IN.)
OD
(IN.)
WALL
(IN.)
WORKING PSI
AT 70°F
BURST PSI
AT 70°F*
LBS. PER
100 FT.
Request a Quote
291 0257 3/16 .447 .130 216 648 7 Request Quote
291 0334 1/4 .520 .135 208 624 9 Request Quote
291 0411 5/16 .592 .140 183 549 11 Request Quote
291 0488 3/8 .655 .140 166 498 13 Request Quote
291 0565 1/2 .800 .150 141 423 17 Request Quote
291 0719 3/4 1.100 .175 91 273 28 Request Quote
291 0873 1 1.380 .190 75 225 36 Request Quote

Sold by standard coil length only (25 ft.). Add length suffix to part number when ordering.
Example: 25 ft. of 3/16" I.D. hose is part number 291 0257-25.
*Burst pressures can be expected to decrease by at least 20% for each 200°F increase up to 350°F.
BOLD indicates the critical dimension for fittings application.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov