Parker Industrial - Sand Recovery Hose Suction / Vacuum - Series SW409

Sand Recovery Hose Suction / Vacuum - Series SW409

Vendor: Parker Industrial

Category: Material Handling Hose    Sub Type: Material Handling Abrasives and Corrosives hose


Application:

Sand Recovery Hose
Suction / Vacuum
3/16" Natural Rubber Tube

Series SW409

  • Abrasive materials, debris, sand
  • Construction, general industrial, mining, sand clean-up/recovery

Series SW409 is a heavy duty suction and discharge hose for transfer and recovery of sand and severely abrasive materials. The static dissipating 3/16" natural rubber tube provides abrasion resistance, and the dual wire helix provides full suction capability and kink resistance. The SBR cover is resistant to abrasion, cuts, scuffs and weathering.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

3/16" Black natural rubber; static dissipating

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black SBR; wrapped finish

Temperature:

-40°F to +150°F (-40°C to +66°C)

Packaging:

Coils

Branding:

PARKER SERIES SW409 SAND RECOVERY HOSE XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with red stripe

Part No. ID ID Reinf
Plies
OD OD Approx
Wt
Approx
Wt
Min
Bend
Rad
Max
Rec
WP
Std
Pack 
Request Quote
(in) (mm) (in) (mm) (lbs/ft) (kg/ft) (in) (psi) Qty(ft)
SW409-2000 2 50.8 2 2.75 69.9 1.41 0.64 6 200 100 Request Quote
SW409-3000 3 76.2 2 3.75 95.3 2.42 1.1 12 175 100 Request Quote
SW409-4000 4 101.6 2 4.75 120.7 3.16 1.43 16 150 100 Request Quote
SW409-5000 5 127 2 5.813 147.6 4.25 1.93 20 100 100 Request Quote
SW409-6000 6 152.4 2 6.813 173 5.3 2.4 24 100 100 Request Quote

Warning!

Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov