JGB Private Brand - OROFLEX® 10 Lay Flat Hose

OROFLEX® 10 Lay Flat Hose

Vendor: JGB Private Brand

Category: Large Diameter Hose (LDH)
Category: Lay Flat Hose
Category: Oilfield
Category: Suction & Discharge
Category: Water Hose


Application:

A lay flat liquid transfer hose to transfer fresh water or produced water, liquid manure, industrial sludges & slurries, contaminated liquids, fertilizers, oils, medium and heavy hydrocarbons, diesel fuels & many chemicals in solution.
Suitable for use and recommended for INDUSTRIAL and AGRICULTURE applications in:

  • Cleaning of Industrial Plants Water operations "Bypass"
  • Bilge water operations Cable Sheath
  • Fire protection in mining (MSHA) Relining
  • Refineries and Petro-Chemical
  • Applications for water discharge
  • Transfer of Water, Liquid
  • Manure and Sludges
  • Dewatering
  • Irrigation
  • Mining
  • Emergency Repairs & Water Supplies
  • Refueling
  • Temporary Installations & Bypasses

Temperature:

-4°F to 176°F (-20°C to 80°C)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Lengths:

200 m, 100 m (660 ft, 330 ft, 100 ft, 50 ft)

Colors:

Black ribbed

Not recommended or approved for fire fighting.

Construction: Circular polyester weave extruded internally and externally with NBR-PVC.
Made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by tough highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesive.


Lining Properties: a. Ultimate Tensile Strength: Tensile strength of the lining and cover shall not be less than 1500 psi (10,500 kpa ).
b. Ultimate Elongation: 400% minimum.
c. Accelerated Aging Test: The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi ± 10 psi , (2100kpa ± 70kpa) and temperature of 70 degrees centigrade ±1 degree cent.
Elongation at WP: <1.5%
Expansion at WP: <6%
Abrasion: 3000 DIN cycles

Diameter Working
Pressure
Burst Pressure End Pull Weight Wall
Thickness
Bend radius a
W.P.
Request a Quote
Inch mm psi K Pa psi K Pa lb Kg. lb/ft gr /m. inch mm. ft. mm.
1 1/4 30 300 2100 1300 9000 1543 700 0,192 285 0,09 2,3 1,64 500 Request a Quote
1 1/2 38 200 1400 600 4200 1984 900 0,209 310 0,08 ,20 2,30 700 Request a Quote
1 3/4 45 200 1400 600 4200 2646 1200 0,249 370 0,07 1,8 2,95 900 Request a Quote
2 52 200 1400 600 4200 2866 1300 0,269 400 0,08 2,0 3,61 1100 Request a Quote
2 1/4 60 200 1400 600 4200 3086 1400 0,390 580 0,11 2,86 3,94 1200 Request a Quote
2 1/2 635 150 1000 435 3000 3086 1400 0,320 475 0,08 2,0 4,27 1300 Request a Quote
2 3/4 70 150 1000 435 3000 3748 1700 0,384 570 0,08 2,15 4,43 1350 Request a Quote
3 76 150 1000 435 3000 3968 1800 0,444 660 0,10 2,5 4,76 1450 Request a Quote
3 1/2 90 150 1000 435 3000 4630 2100 0,579 860 0,10 2,5 4,86 1480 Request a Quote
4 102 150 1000 435 3000 5291 2400 0,639 950 0,10 2,5 5,58 1700 Request a Quote
4 1/4 110 150 1000 435 3000 8818 4000 0,734 1092 0,09 2,34 5,91 1800 Request a Quote
5 127 150 1000 435 3000 9259 4200 0,976 1450 0,12 3,0 6,89 2100 Request a Quote
6 152 150 1000 435 3000 11023 5000 1,110 1650 0,12 3,0 7,38 2250 Request a Quote
8 203 120 800 350 2400 14550 6600 1,918 2850 0,12 3,0 9,84 3000 Request a Quote
10 254 120 800 350 2400 15873 7200 2,490 3700 0,14 3,5 10,50 3200 Request a Quote
12 305 100 780 230 2400 1600 7400 2,520 3750 0,14 3,5 10,25 3300 Request a Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov