Aeroquip - S-TW Series Smooth Bore Hose

S-TW Series Smooth Bore Hose

Vendor: Aeroquip

Category: Chemical Hose    Sub Type: Chemical Suction & Discharge Hose
Category: Suction & Discharge    Sub Type: Chemical Suction & Discharge Hose


Application:

Meets SAE 100R14A

Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling.

Tube:

Extruded PTFE

Reinforcement:

Stainless steel single wire braid

Temperature:

-65°F to +450°F (-54°C to +230°C)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure

Part Number Hose I.D. Hose O.D. Maximum
Operating
Pressure
Minimum
Burst
Pressure
Minimum
Bend
Radius
Vacuum
Service
Weight
of Hose
Request a Quote
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
S-4TW 4,8 0.19 7,6 0.30 210,0 3000 840,0 12000 50,8 2.00 94,8 28 0,09 0.06 Request Quote
S-5TW 6,6 0.26 9,4 0.37 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,12 0.08 Request Quote
S-6TW 8,1 0.32 10,9 0.43 175,0 2500 700,0 10000 101,6 4.00 94,8‡ 28‡ 0,15 0.10 Request Quote
S-8TW 10,7 0.42 13,7 0.54 140,0 2000 560,0 8000 127,0 5.00 94,8‡ 28‡ 0,18 0.12 Request Quote
S-10TW 13,0 0.51 16,0 0.63 105,0 1500 420,0 6000 165,1 6.50 94,8‡ 28‡ 0,24 0.16 Request Quote
S-12TW 16,3 0.64 19,3 0.76 84,0 1200 335,0 4800 190,5 7.50 94,8‡ 28‡ 0,27 0.18 Request Quote
S-16TW 22,4 0.88 26,2 1.03 70,0 1000 280,0 4000 228,6 9.00 40,6‡ 12‡ 0,35 0.26 Request Quote

‡ Maximum negative pressure for -16 and larger
are suitable for hose which has suffered no external
damage or kinking. If greater negative pressures are
required for -16 and larger hoses, the use of an internal
support coil is recommended. Use of an internal support coil
in -06 and larger PTFE hose is recommended for tube support
where extended or continuous service at high temperature
together with low or negative pressure is expected.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov