Morrison Bros. Series 9095C Overfill Prevention Valve

Valve Category:

Overfill Prevention Valves

Valve Subcategory

(for low profile tanks & maximum compatibility)

Manufacturer

Morrison Bros. Co.

The 9095C overfill prevention valve is designed to prevent overfilling storage tanks by
providing a positive shut-off during a pressurized fill. The valve installs at the fill port of
a storage tank and can be set to the desired shut-off level by using standard length pipe
nipples. Anodized aluminum construction increase the matrix of fuel compatibility.

Features:

• Shut-off level can be set to within 1¼" from the top of the tank
• Tight fill connection required. Top fill, remote fill, and dry disconnect connections available
• Installs on a 4" schedule 40 NPT male riser connection
• Standard drop tubes (Morrison 419) are easily attached with included drop tube adaptor
• Field adjustable float can be adjusted up to 5" for precise shut-off level
• Aviation model includes additional float section
• Integral anti-siphon function
• Full flow to shut-off point
• Cushioned shut-off eliminates line shock
• Integral pressure relief feature allows for safe uncoupling at the completion of the fill operation
• 5 PSI and 5 GPM minimum flow requirements
• Typical flow rate is 175 GPM at 10 PSI pressure drop

A mechanical test mechanism is available as an option. The test mechanism allows a
technician to pull on the test line at any time during the filling process to actuate the
float, stop the fill, and verify the valve is working properly.

Construction Details Adaptor... Anodized aluminum Body... Anodized aluminum Float... Nitrophyl-N Plunger and dashpot... Anodized aluminum Upper tube and float guard... E-coated steel Shut-off mechanism... Stainless steel			Certifications & Listings NFPA 30, 30A, UFC, BOCA, SBCCI/SFC and PEI RP200. Florida DEP EQ 356. CARB VR 402A (some models).
NOTE For use on clean product only. Not suitable for motor oil.