Morrison Bros. Series 9095SS Overfill Prevention Valve

Valve Category:

Overfill Prevention Valves

Valve Subcategory

(for 2" tank opening applications not requiring a drop tube)

Manufacturer

Morrison Bros. Co.

The 9095SS valve is installed at the fill port of a storage tank. Designed for use in pressurized fill systems and requires a tight fill connection. The valve installs on a 2 inch NPT male riser connection on low profile tanks requiring a high level shut-off. The valve terminates the fill when the product reaches the preset level. Compatible for use with diesel exhaust fluid (DEF).

Features

• Designed for fill applications that do not require a drop tube
• Can be field adjusted to the desired 90% or 95% shut off level by adjusting the shut-off tube
• The valve design allows for full product flow until it reached the shut-off level
• Typical flow rate is 164 GPM at 10 PSI pressure drop
• 5 PSI & 5 GPM is the minimum flow requirement for the valve to operate. The valve will not work in gravity filling applications
• Can be retrofitted to existing tanks
• The vertical style float allows for installation in openings in close proximity to the tank wall
• Immediate and cushioned shutoff…full flow up to within 1-2 seconds of closing and no abrupt kickback or line shock when valve closes
• Dry disconnect…after shut off product is allowed to automatically drain from the highest point so fill nozzle can be removed without spilling
• Simple mechanics…minimum moving parts. Shutoff is activated by basic hydraulic principle with no springs, levers or complicated sequence leading to closure

Construction Details

• Adaptor: Stainless steel Part A or stainless steel Part F
• Body: Stainless steel
• Float: Polypropylene
• Plunger and dashpot: Stainless steel
• Upper tube and float guard: Stainless steel
• Shut off mechanism: Stainless steel

Certifications & Listings

NFPA 30, 30A, UFC, IFC and PEI /RP2000

NOTE For use on clean product only. Not suitable for motor oil.