Ball Valve Gauge Cocks / Model T-710T and T-710MxF-T

Valve Category:

Ball Valves

Valve Subcategory

Gauge Cocks

Manufacturer

Legend Valve

  • Stainless Steel
  • I.P.S.
  • ISO-9002

LEGEND MODELS T-710T and T-710MxF-T ball valves are designed to replace the traditional plug valve design. They are constructed of 316 stainless steel and their T-handles do not obscure the gauge face. They have the following advantages over the plug design:
  • 800 WOG pressure rating
  • Always easily hand operable
  • No bottom nut to tighten
  • Seats and packing instead of grease creating the seal
  • The valve cannot be blown-out


PRESSURE RATING
800 W.O.G. NON-SHOCK

All sizes rated: 150 W.S.P.
Legend Model T-710 and T-710MxF-T Ball Valve Seat Ratings

Request a Quote Request Quote

MATERIAL SPECIFICATION
PART MATERIAL
HANDLE NUT 304 SS
HANDLE 304 SS
PACKING GLAND 304 SS
STEM PACKING PTFE
THRUST WASHER PTFE
SEATS PTFE
STEM 316 SS
BALL 316 SS
BODY 316 SS
SEAT RETAINER 316 SS


Legend Model T-710T and T-710MxF-T Ball Valve Dimensions in Inches Diagram

DIMENSIONS IN INCHES
VALVE SIZE A B C D C.V.**
1/4 1.64 1.19 .20 0.97 1.0
1/4 1.59 1.19 .197 0.97 1.0
**The CV Factor is the gallons of water per minute passed through the valve with a 1 PSI pressure drop.
Ball Valve Gauge Cocks / Model T-710T and T-710MxF-T
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov