Parker Industrial
TITANFLEX UHMWPE Chemical Hose - Series SWC693

Types:
Chemical Hose     Sub Type: Chemical Transfer Hose

Vendor: Parker Industrial

Application:

TITANFLEX® UHMWPE Chemical Hose
FDA, USDA, 3-A
Series SWC693

• Non-fatty and non-oily foods and liquids, potable water, sanitary products
• Acids, chemicals, solvents
• In-plant and tank transfer, delivery, transport

Series SWC693 is an extremely flexible, high pressure, high temperature suction and discharge hose designed to handle approximately 98% of commonly used acids, chemicals and solvents as well as food, pharmaceutical and sanitary materials. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth tube that will not impart taste or odor. The ultra high molecular weight polyethylene (UHMWPE) tube meets FDA, USDA and 3-A requirements and will not leach into and contaminate the product being conveyed. The lightweight corrugated hose construction incorporates a dual wire helix that provides full suction capability, superior kink resistance, minimal force-to bend and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, mild chemicals and ozone.

NOTES:  Contact JGB for additional chemical compatibility information.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  FDA, USDA, 3-A

Tube:

Translucent ultra high molecular weight polyethylene (UHMWPE)

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Green EPDM; corrugated wrapped finish

Temperature:

-40°F to +250°F (-40°C to +121°C)

Packaging:

Coils

Branding:

PARKER SERIES SWC693 TITANFLEX® UHMWPE CHEMICAL SUCTION HOSE XXX PSI MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Green with yellow stripe

Part Number	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
SWC693-1000	1	25.4	2	1.375	34.9	0.38	1	250	100	Request Quote
SWC693-1250	1-1/4	31.8	2	1.625	41.3	0.48	1.3	250	100	Request Quote
SWC693-1500	1-1/2	38.1	2	1.875	47.8	0.62	1.5	250	100	Request Quote
SWC693-2000	2	50.8	2	2.438	61.9	0.93	2	250	100	Request Quote
SWC693-3000	3	76.2	2	3.438	87.3	1.45	4.5	200	100	Request Quote
SWC693-4000	4	101.6	2	4.5	114.3	2.17	8	200	100	Request Quote

WARNINGS! It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact JGB for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature. At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines. Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube