Thermoid
WD-150 WATER DISCHARGE

Types:
Suction & Discharge     Sub Type: Water Suction & Discharge Hose
Water Hose     Sub Type: Water Suction & Discharge Hose

Vendor: Thermoid

Application:

WD-150 is the heavy-duty water discharge hose suitable for construction sites, work boats and mines where abrasion resistance and higher working pressures are required. This hose features a reinforcement of two to four plies of polyester cord, depending on the I.D., that allows this hose to work at a constant working pressure of 150 psi irregardless of hose I.D. The EPDM tube and cover offer excellent heat resistance.

Oil Resistance:  Limited

Tube:

EPDM

Reinforcement:

Heavy plies of polyester cord in sizes
1" to 4" I.D. – 2 plies
5" and 6" I.D. – 4 plies

Cover:

EPDM

Temperature:

-40°F to +180°F
-40°C to +82°C

Packaging:

100 ft. maximum

Branding:

None

Couplings:

Contact JGB for proper hose fitting recommendation and coupling procedure.

Colors:

Black

Product Number	Nominal I.D.		Nominal O.D.		Plies	Working Pressure		Weight		Request a Quote
	in.	mm	in.	mm		psi	Mpa	lb/ft	Kg/m
17826010002	1	25.40	1.28	32.54	2	150	1.03	0.27	0.40	Request Quote
17826012502	1-1/4	31.75	1.53	38.89	2	150	1.03	0.32	0.48	Request Quote
17826015002	1-1/2	38.10	1.78	53.18	2	150	1.03	0.38	0.57	Request Quote
17826020002	2	50.80	2.28	57.94	2	150	1.03	0.56	0.83	Request Quote
17826025002	2-1/2	63.50	2.80	71.04	2	150	1.03	0.7	1.04	Request Quote
17826030002	3	76.20	3.28	83.34	2	150	1.03	0.76	1.13	Request Quote
17826040002	4	101.60	4.31	109.54	2	150	1.03	1.13	1.68	Request Quote
17826050002	5	127.00	5.50	139.70	4	150	1.03	2.45	3.65	Request Quote
17826060002	6	152.40	6.50	165.10	4	150	1.03	2.77	4.12	Request Quote