JGB Private Brand
Eagle Orange/Clear Suction and Discharge Hose

Types:
Suction & Discharge
    Sub Type:
    Water Suction & Discharge Hose
Water Hose
    Sub Type:
    Water Suction & Discharge Hose

Vendor: JGB Private Brand

Eagle Orange/Clear Suction & Discharge Hose

Product Spec Sheet (PDF)

Application:

Suction and discharge hose for use in fish suction and rental/construction pumping.

Tube:

Smooth Bore, flexible PVC

Reinforcement:

Rigid PVC helix, synthetic braiding

Cover:

Corrugated O.D.

Temperature:

-13°F to 140°F

Features:

Lightweight and flexible
External helix provides for easy drag
Rated for both suction & discharge
Clear sidewall permits visual check of material flow

NOTE: Banding coil must be used for 1-1/2", 2", 3", 4", 5" and 6" sizes.

* Over flexing or repeated flexing of hose within 18" of fitting is a common cause of hose failure.
Installing a 12" - 14" section of our Banding Coil at the end of the hose should be considered.
JGB will not be responsible for damage to hose due to over flexing.

Part #	ID	OD	Weight	Std. Length	WP	Vacuum Rating	Min Bend Radius	Request Quote
Part #	in	in	lbs/ft	ft	psi	inch HG	inch	Request Quote
007-0240-0100*	1-1/2	2.03	0.47	100	110	29	2.5	Request Quote
007-0320-0100I	2	2.60	0.69	100	100	29	4	Request Quote
007-0400-0100*	2-1/2	3.01	0.74	100	100	29	5	Request Quote
007-0480-0100I	3	3.70	1.13	100	100	28	6	Request Quote
007-0640-0080I	4	4.78	1.74	100	80	28	7	Request Quote
*	5	6.04	2.99	100	70	28	9	Request Quote
007-0960-0072I	6	7.17	3.88	20,60,100	70	28	10	Request Quote
007-1280-0060I	8	9.34	5.55	20,25	60	28	16	Request Quote
007-1600-0040I	10	11.63	8.90	20,25	40	28	25	Request Quote
015-0192-0020I	12	13.66	10.30	20	30	25	45	Request Quote

* Not standard - call for availability.

Eagle Slinky Banding Coils

Application:

Fit into corrugation between helix
Provides smooth surface for banding and clamps
Designed in clear rigid food grade helix
One piece is cut in half to be used at both ends of hose
Banding coil height is equal or slightly higher than hose helix for firm fitting

Nominal Size (ID)	Approx. Weight	Length (in)	Request Quote
in	lbs	(for both ends)	Request Quote
1-1/2	0.07	6	Request Quote
2	0.12	7	Request Quote
2-1/2	0.19	8	Request Quote
3	0.29	8	Request Quote
4	0.51	9	Request Quote
5	0.95	10	Request Quote
6	1.57	14	Request Quote
8	2.92	15	Request Quote