Jackson Industries
Ultra Extra High Pressure Fluoropolymer Hose
| Applications: |
|
| Construction: |
Ultra Series extra high pressure hose is constructed with Fluoropolymer
innercores of non-conductive ETFE or PFA. Unlike other types of hose that use
multiple layers of stainless steel wire reinforcement, Ultra incorporates the
use of one braided layer of high tensile aramid fiber and one layer of stainless
steel. This value engineered construction reduces weight and improves bend
radius while increasing burst pressure. An integral abrasion resistant Hytrel
jacket protects the exterior braid and has a smooth finished appearance.
|
| Benefits: |
|
| Temperature Rating: | -50°F to +275°F |
| Part Number | ID Inch |
Nominal Size |
Working Pressure |
Burst Pressure |
Hydrostatic** Pressure Test |
Nitrogen** Pressure Test |
OD Inch |
Min Bend Radius (Inch) |
Request Quote |
| S-4 PFA Ultra | 0.22 | 1/4 | 6,000 PSI | 24,000 PSI | 9,000 PSI | 6,000 PSI | .46 | 1.0 | Request Quote |
| S-6 PFA Ultra | 0.31 | 3/8 | 6,000 PSI | 24,000 PSI | 9,000 PSI | 6,000 PSI | .54 | 2.0 | Request Quote |
| S-8 PFA Ultra | 0.40 | 1/2 | 6,000 PSI | 24,000 PSI | 9,000 PSI | 6,000 PSI | .71 | 2.3 | Request Quote |
* For oxygen service use Ultra PFA, Ultra ETFE is not recommended for
oxygen service.
** For gas applications assemblies are pressure tested with nitrogen at 6000 PSI, for fluid transfer each hose assembly is pressure tested at 9000 PSI.
** For gas applications assemblies are pressure tested with nitrogen at 6000 PSI, for fluid transfer each hose assembly is pressure tested at 9000 PSI.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |