Manuli Rubber Industries
GOLDEN ISO / 21 AntiWear

Types:
Hydraulic Hose

Vendor: Manuli Rubber Industries

Application:

OUTSTANDING ABRASION RESISTANCE

Medium and high pressure hydraulic lines with installation constraints, pilot lines, return, drain and suctions lines

KEY PERFORMANCE

• Extreme abrasion resistance
• Approved at 200.000 impulse cycles, 133% WP at T=100°C (ISO 18752 grade A)
• Very low bend radius to suit restricted space installations
• High robust and compact hose structure compared to rated pressure
• High environmental agents resistance
• Vacuum resistance accordingly to SAE 100R4 requirements

Tube:

Synthetic rubber

Reinforcement:

One wire braid (DN 6÷12)
Two wire braids (DN 16÷25)

Cover:

High abrasion resistant synthetic rubber

Temperature:

Continuous Service: -40°F to +212°F / -40°C to +100°C

Recommended Fluids:	Mineral oils, vegetable and synthetic ester based oils (up to +212° F / +100° C), glycols and polyglycols, mineral oils in aqueous emulsion and water
Insert:	MF2000® – MULTIFIT TYPE
Applicable Specs.:	ISO 18752 grade A, SAE J517 type 100 R17, ISO 11237-R17
Type Approvals:	MSHA, GOST-R

PART. REF.	HOSE SIZE			R.O.D.		O.D.		MAX W.P.		BURST PRESSURE		MIN. BEND RADIUS		WEIGHT		FITTING	Request Quote
	DN	dash	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	g/m	lb/ft
H01125006	6	-04	1/4	10.2	0.40	12.0	0.47	210	3040	840	12180	50	1.97	180	0.12	MF+M00830-04	Request Quote
H01125008	8	-05	5/16	11.5	0.45	13.6	0.54	210	3040	840	12180	55	2.17	210	0.14	MF+M00830-05	Request Quote
H01125010	0	-06	3/8	14.4	0.57	16.2	0.64	210	3040	840	12180	65	2.56	300	0.20	MF+M03400-06	Request Quote
H01125012	2	-08	1/2	17.9	0.70	19.7	0.78	210	3040	840	12180	90	3.54	415	0.28	MF+M03400-08	Request Quote
H01125016	16	-10	5/8	22.2	0.87	24.0	0.94	210	3040	840	12180	100	3.94	620	0.42	MF+M03400-10	Request Quote
H01125019	19	-12	3/4	25.6	1.01	27.7	1.09	210	3040	840	12180	120	4.72	780	0.52	MF+M03400-12	Request Quote
H01125025	25	-16	1	33.0	1.30	35.2	1.39	210	3040	840	12180	150	5.91	1120	0.75	MF+M03400-16	Request Quote