Alemite
1/4 inch -28 and 1/8 inch Thread Forming Fittings
Vendor: Alemite
Coupling Type: Miscellaneous Couplings
Description:
Thread-forming fittings have special tapered drive threads to reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread-forming fittings can be replaced by any standard threaded fitting or by another thread-forming fitting.
FEATURES:
- Threads provide strong seal
- Exceeds 72-hour salt-spray test
- Maximum pressure: 8,000 psi
Coupling Category:
Lubrication Fittings - Thread Forming Fittings
| Product # | Thread | Type | Hex Size | Recommended Hole Size |
| 3038-B | 1/4"-28 Spl. Taper | Str. | 5/16" | .230 - .235 |
| 3053-B | 1/4"-28 Spl. Taper | 45° | 3/8" | .230 - .235 |
| 3054-B | 1/4"-28 Spl. Taper | 90° | 3/8" | .230 - .235 |
| 1720-B | 1/8" Spl. Taper | Str. | 7/16" | .373 - .380 |
| 1724-B | 1/8" Spl. Taper | 45° | 7/16" | .373 - .380 |
| 1722-B | 1/8" Spl. Taper | 65° | 7/16" | .373 - .380 |
| 1723-B | 1/8" Spl. Taper | 90° | 7/16" | .373 - .380 |
| 369584 | 1/4"-28 Spl. Taper | Str. | 5/16" | .230 - .235 |
| 369582 | 1/4"-28 Spl. Taper | Str. | 9/32" | .230 - .235 |
| 369607 | 1/4"-28 Spl. Taper | Str. | 5/16" | .230 - .235 |
| 369579 | 1/8"-27 Spl. Taper | Str. | 7/16" | .373 - .380 |
NOTE: Geometry modifications and nate materials available on request.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |