Super Swivels
Male J.I.C. (37°) X J.I.C. Swivel Nut (37°)
Super Swivels® are manufactured from Carbon Steel or 304 and 440c Stainless Steel and offered with a wide variety of seal options.
Super Swivels are used in a wide variety of applications, i.e. hose reels, hydraulic log loaders, paint equipment, automatic car washes, wrecker trucks, horizontal directional drilling, machine tool indexers, hydraulic wheel motors, hot tar applicators, robotics, power line equipment, railroad equipment, and mining equipment, to mention a few.
Super Swivels are manufactured from Carbon Steel or 304 and 440c Stainless Steel.
304 Stainless Steel (304) is recommended for low pressure corrosive environments.
440c Stainless Steel (SS) is a martensitic, high carbon, magnetic stainless steel, heat-treated to maintain a high-pressure rating. Not as corrosion resistant as 300 Series Stainless Steel.
All stainless steel swivels have a 4 to 1 proof pressure.
(V) Viton® (Fluorocarbon) – For most petroleum based applications. (-15°F to 250°F)
(AL) Aflas® (Tetrafluoroethylene-propylene copolymer)
Other seals available upon request:
Please specify oxygen use when ordering. Super Swivels are not recommended for breathing air or steam.
Super Swivels are used in a wide variety of applications, i.e. hose reels, hydraulic log loaders, paint equipment, automatic car washes, wrecker trucks, horizontal directional drilling, machine tool indexers, hydraulic wheel motors, hot tar applicators, robotics, power line equipment, railroad equipment, and mining equipment, to mention a few.
Options
Base Material
Super Swivels are manufactured from Carbon Steel or 304 and 440c Stainless Steel.
304 Stainless Steel (304) is recommended for low pressure corrosive environments.
440c Stainless Steel (SS) is a martensitic, high carbon, magnetic stainless steel, heat-treated to maintain a high-pressure rating. Not as corrosion resistant as 300 Series Stainless Steel.
All stainless steel swivels have a 4 to 1 proof pressure.
Seal Material
(V) Viton® (Fluorocarbon) – For most petroleum based applications. (-15°F to 250°F)
(AL) Aflas® (Tetrafluoroethylene-propylene copolymer)
- Better resistance to many individual chemicals.
- For service in high temperature environments.
- (Low temperature limitations.)
- (+32°F to 400°F)
Other seals available upon request:
- Buna
- EPR
- Neoprene
- Kalrez®
Please specify oxygen use when ordering. Super Swivels are not recommended for breathing air or steam.
| PART NUMBER | O.A.L. | DIM. B | SWIVEL HEX |
WRENCH/ HEX |
SWIVEL NUT T1 U.N. |
STEM T2 U.N. |
SWG. RADIUS |
MAX P.S.I.G. |
THROUGH HOLE |
| 9 SS 4 MJ 6 X FJS 4 | 2.887 | 2.375 | 0.562 | 0.750 | 7/16-20 | 9/16-18 | 1.171 | 3500 | 0.165 |
| 9 SS 4 MJ 6 X FJS 6 | 2.887 | 2.375 | 0.687 | 0.750 | 9/16-18 | 9/16-18 | 1.167 | 3500 | 0.250 |
| 9 SS 8 MJ 8 X FJS 6 | 3.070 | 2.523 | 0.687 | 1.000 | 9/16-18 | 3/4-16 | 1.283 | 3500 | 0.290 |
| 9 SS 8 MJ 8 X FJS 8 | 3.100 | 2.523 | 0.875 | 1.000 | 3/4-16 | 3/4-16 | 1.254 | 3500 | 0.290 |
| 9 SS 8 MJ 8 X FJS 10 | 3.100 | 2.523 | 1.000 | 1.000 | 7/8-14 | 3/4-16 | 1.017 | 4500 | 0.320 |
| 9 SS 8 MJ 10 X FJS 10 | 3.200 | 2.623 | 1.000 | 1.000 | 7/8-14 | 7/8-14 | 1.017 | 4500 | 0.320 |
| 9 SS 12 MJ 12 X FJS 12 | 3.606 | 2.885 | 1.250 | 1.375 | 1 1/16-12 | 1 1/16-12 | 1.040 | 4500 | 0.460 |
| 9 SS 16 MJ 16 X FJS 16 | 4.348 | 3.482 | 1.500 | 1.625 | 1 5/16-12 | 1 5/16-12 | 1.277 | 4000 | 0.650 |
| 9 SS 20 MJ 20 X FJS 20 | 4.989 | 3.835 | 2.000 | 1.750 | 1 5/8-12 | 1 5/8-12 | 1.403 | 4000 | 0.790 |
| 9 SS 24 MJ 24 X FJS 24 | 6.343 | 5.045 | 2.250 | 2.125 | 1 7/8-12 | 1 7/8-12 | 1.699 | 4000 | 0.920 |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |