CEJN / Series 116 / 150 MPa
Description:
150 MPa
Coupling Category
High Pressure Couplings
Manufacturer
CEJN
Series 116 is available in both standard and Flat-face designs.
The series is a CEJN original with extremely small outside dimensions and a patented seal design.
Non-drip connection and disconnection are standard on the CEJN high pressure range.
All exposed components are made of zinc plated steel.
The coupling is also available in a design with a safety ring for the locking sleeve to prevent accidental disconnection.
Plastic dust caps are standard on both coupling and nipple (dust caps of aluminium can be ordered separately).
There is a coupling and nipple manufactured of stainless steel and chemically nickel-plated steel available for use in corrosive environments.
There is a coupling with a 90°-connection angle for use in confined areas.
The range is primarily recommended for cylinders, bolt tensioner tools, bearing pullers, etc.
Technical data
Material: Hardened, zinc chromate plated steel
Max. working pressure: 150 MPa.
Min. bursting pressure: 300 MPa.
Nominal flow diameter: 2.5 mm (3/32")
Temperature range: - 30°C - + 100°C (-20°F - + 210°F)
Flow capacity at pressure drop 0,4 MPa: 6.0 l/min (1.32 GPM UK)
The series is a CEJN original with extremely small outside dimensions and a patented seal design.
Non-drip connection and disconnection are standard on the CEJN high pressure range.
All exposed components are made of zinc plated steel.
The coupling is also available in a design with a safety ring for the locking sleeve to prevent accidental disconnection.
Plastic dust caps are standard on both coupling and nipple (dust caps of aluminium can be ordered separately).
There is a coupling and nipple manufactured of stainless steel and chemically nickel-plated steel available for use in corrosive environments.
There is a coupling with a 90°-connection angle for use in confined areas.
The range is primarily recommended for cylinders, bolt tensioner tools, bearing pullers, etc.
Technical data
Material: Hardened, zinc chromate plated steel
Max. working pressure: 150 MPa.
Min. bursting pressure: 300 MPa.
Nominal flow diameter: 2.5 mm (3/32")
Temperature range: - 30°C - + 100°C (-20°F - + 210°F)
Flow capacity at pressure drop 0,4 MPa: 6.0 l/min (1.32 GPM UK)
| Couplings | Part No. | Connection | Length | Dia. | Hex. | Con. stroke | Weight | Rec. torque (Nm) | Rec sealing method |
| Female thread | 10 116 1201 | G 1/8" | 53,8 | 28,0 | 24 | 18,3 | 155 | 40-50 | T |
| 10 116 1202 | G 1/4" | 61,3 | 28,0 | 24 | 18,3 | 165 | 40-50 | CMS | |
| 10 116 1222 safety lock | G 1/4" | 61,3 | 28,0 | 24 | 18,3 | 170 | 40-50 | CMS | |
| 10 116 1230 angled connection | G 1/4" | 66,6 | 35 | 28 | 18,3 | 245 | 50-60 | T (1*) | |
| 10 116 1246 safety lockstainless steel (chemical nickel plated steel locking sleeve) | G 1/4" | 61,3 | 28,0 | 24 | 18,3 | 170 | 40-50 | T | |
| 10 116 1402 | NPT 1/4" | 58,3 | 28,0 | 24 | 18,3 | 165 | 50-60 | - | |
| 10 116 1422 Safety lock | NPT 1/4" | 58,3 | 28,0 | 24 | 18,3 | 170 | 50-60 | - |
| Nipples | Part No. | Connection | Length | Dia. | Hex. | Con. stroke | Weight | Rec. torque (Nm) | Rec sealing method |
| Female thread | |||||||||
| 10 116 6201 | G 1/8" | 33,3 | 19,6 | 17 | - | 40 | 40-50 | T | |
| 10 116 6202 | G 1/4" | 38,0 | 25,4 | 22 | - | 60 | 40-50 | CMS | |
| 10 116 6241 stainless steel valve (chemical nickel plated steel body) | G 1/4" | 38,0 | 25,4 | 22 | - | 60 | 40-50 | CMS | |
| 10 116 6402 | NPT 1/4" | 35,7 | 25,4 | 22 | - | 55 | 30-40 | - | |
| Male Thread without valve | 10 116 5252 | G 1/4" | 40,5 | 25,4 | 22 | - | 60 | 80-90 | Washer ("2) |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |