Dixon Strap-Grip Saddles and Fittings
Description:
Saddles Only - Male NPT - Boss Lock Type C Coupler - Type E Adapter
Coupling Category
Cam and Groove
Manufacturer
Dixon Cam and Groove Fittings
- Strap-Grip is designed to provide greater resistance to end pull than conventional band clamps alone.
- Only the fittings shown below are designed for use with Strap-Grip Saddles.
- Saddles are sold in pairs and designed for use with 3/4" or 5/8" wide bands.
- Bands must be purchased separately.
- Band clamps should first be applied to the OD to seal the hose. Then Strap-Grip saddles should be banded over the initial clamp to anchor the fitting in the hose.
Saddles only
| Size | Hose OD | Plated Iron | |
| from | to | Part # | |
| 1 1/2" | 1-13/16" | 2-1/8" | SGS150 |
| 2" | 2-5/8" | 3" | SGS200 |
| 3" | 3-1/2" | 3-7/8" | SGS300 |
| 4" | 4-9/16" | 5-1/8" | SGS400 |
| 6" | 6-1/2" | 7-1/16" | SGS600 |
| 8" 1 | 8-5/8" | 9-3/8" | SGS800 |
1 items will be discontinued as inventory is
depleted
Male NPT x Hose Shank
| Size | Schedule 40 Plated Carbon Steel |
Schedule 40 Stainless Steel |
Schedule 80 1 Plated Carbon Steel |
| Part # | Part # | Part # | |
| 1-1/2" | LP21 | ... | LP21-80 |
| 2" | LP26 | ... | LP26-80 |
| 3" | LP36 | RLP36 2 | ... |
| 4" | LP46 | RLP46 2 | ... |
| 6" | LP66 | ... | ... |
1 Schedule 80 stems meet NFPA 58
2 tubular steel
2 tubular steel
Boss-Lock type C coupler x hose shank
| Size | 316 Stainless |
| Part # | |
| 1" | RC100CEZ |
| 1 1/2" | RC150CEZ |
| 2" 1 | RC200CEZ |
| 3" 1 | RC300CEZ |
1 items will be discontinued as inventory is
depleted
type E - adapter x hose shank
| Size | 316 Stainless |
| Part # | |
| 2" | RE200C |
| 3" | RE300C |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |