Dixon Wilkerson EconOmist® Compact Lubricators

Description:

Transparent Bowl - Metal Bowl

Coupling Category

Air Fittings

Manufacturer

Dixon Air Fittings

Flow Guide®
The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.

Type of oil to use:
For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents.

4.09 oz. bowl manual drain high flow capacity can be filled under pressure To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit. Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery. If flow increases or decreases, the oil delivery rate will increase or decrease proportionally. Turning the sight dome clockwise will stop all oil delivery. maximum operating conditions: transparent bowl: 150 PSIG (10.3 bar) and 32°F to 125°F (0°C to 52°C) metal bowl: 250 PSIG (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)

FRL’s are designed for air service only, unless otherwise indicated.

SCFM ratings at 150 PSIG inlet pressure.