Parker Industrial - DRAGON BREATH II Chlorobutyl Barber Pole Steam Hose - Series 7285

DRAGON BREATH II Chlorobutyl Barber Pole Steam Hose - Series 7285

Vendor: Parker Industrial

Category: Steam Hose

Application:

DRAGON BREATH® II Chlorobutyl Barber Pole Steam Hose Non-Skive E-Z Crimp
Series 7285

  • Saturated and superheated steam
  • Cleaning containment vessels and manufacturing equipment; cleaning and heating process equipment
  • Manufacturing and processing plants, refineries

Series 7285 is a distinctive hose designed for long-lasting steam service—one of the toughest applications for hose, where the hot-cold/wet-dry cycling attacks rubber compounds externally as well as internally. The hose construction incorporates a premium, high-performance chlorobutyl tube which resists heat and popcorning, and a wire braid reinforcement for crush-resistant durability, kink resistance and a path to conduct a static electrical charge to ground. The EPDM cover resists abrasion, cracking, hardening and ozone, and the red/black barber pole cover provides color-coded identification from all angles and great distances. Series 7285 is qualified with Parker non-skive crimp couplings for easy and quick assembly fabrication as well as maintenance-free service.

Design Factor:  10:1
Vacuum:  Not recommended
Industry Standards:  None applicable

Tube:

Black chlorobutyl

Reinforcement:

Multiple wire braids

Cover:

Black and red EPDM in alternating spirals; perforated wrapped finish

Temperature:

-40°F to +406°F saturated steam/+450°F superheated steam (-40°C to +208°C saturated steam/+232°C superheated steam)

Packaging:

Cartons

Branding:

PARKER SERIES 7285 DRAGON BREATH® II STEAM HOSE 250 PSI MAX WP (DATE CODE)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with red spiral stripe

Part No. ID ID Reinf
Plies		 OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
7285-1002 1 25.4 2 1.546 39.3 0.81 12 250 50 Request Quote
7285-502 1/2 12.7 2 1.031 26.2 0.5 7 250 50 Request Quote
7285-752 3/4 19.1 2 1.284 32.6 0.64 9.5 250 50 Request Quote

Warnings!

  • Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to ARPM publication IP-11-1, "Guide for Use, Testing and Inspection of Steam Hose."
  • Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
  • Use only hoses designated for steam service for steam applications.
  • Prior to use with detergents or rust inhibitors, contact JGB.
  • Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov

JGB Home
JGB Military
News
Catalogs
About JGB
Become a Supplier

Copyright © 2000 - 2021 JGB Enterprises, Inc. All Rights Reserved

115 Metropolitan Drive, Liverpool, NY 13088 (Syracuse Area)
Largest INDUSTRIAL and HYDRAULIC HOSE Company in the United States!
Phone : (315) 451-2770
Contact us