Vendor: Parker Industrial

Category: Petroleum Hose    Sub Type: Petroleum Petro Transfer Hose

---

Application:

LP Gas Hose Static Wire ISO 2928-1986 (E)
Series SS106

• LP gas/propane
• Bulk loading/unloading; in-plant tank transfer

Series SS106 is a large diameter, heavy duty liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading. The hose construction incorporates multiple plies of textile reinforcement for flexibility and kink resistance, and the perforated cover is resistant to abrasion, oil and ozone. The hose meets ISO 2928-1986 (E) requirements.

NOTE:

• Not for applications requiring Underwriters Laboratories (UL) or Canadian Gas Association (CGA) performance or listing.

Series SS106 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series SS106 may be used for natural gas service, but ONLY under ALL of the following conditions:

• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
• Series SS106 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series SS106 and Compressed Natural Gas (CNG): Series SS106 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.

Series SS106 and Anhydrous Ammonia (NH3): Series SS106 is not for use with anhydrous ammonia.

Design Factor:  5:1
Vacuum:  Not recommended
Industry Standards:  ISO 2928-1986 (E)

Tube:

Black nitrile

Reinforcement:

Multiple textile plies with static wire

Cover:

Black nitrile; perforated wrapped finish

Temperature:

-40°F to +180°F (-40°C to +82°C)
(The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)

Packaging:

Coils

Branding:

PARKER SERIES SS106 (ID) LPG HOSE ISO 2928-1986 (E) 20 BAR 350 PSI WP (DATE CODE) MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Approx Wt	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(kg/ft)	(psi)	Qty (ft)
SS106-1250	1-1/4	31.8	4	1.99	50.6	0.82	0.37	350	100	Request Quote
SS106-1500	1-1/2	38.1	4	2.24	56.9	0.98	0.44	350	100	Request Quote
SS106-2000	2	50.8	4	2.74	69.6	1.31	0.59	350	100	Request Quote
SS106-2500	2-1/2	63.5	4	3.24	82.3	1.87	0.85	350	100	Request Quote
SS106-3000	3	76.2	4	3.74	95	2.53	1.15	350	100	Request Quote
SS106-4000	4	101.6	6	5	127	4.47	2.03	350	100	Request Quote

WARNING! Use only with couplings qualified by Parker. Do not use with male swivel couplings or other couplings containing o-rings, which may dry out, crack and fail over time.

---