Vendor: Parker Industrial

Category: Suction & Discharge    Sub Type: Water Suction & Discharge Hose
Category: Water Hose    Sub Type: Water Suction & Discharge Hose

---

Application:

TITANFLEX®
Corrugated Oil Field Suction / Vacuum Hose
Series SWC509

• Brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries, water
• Oil field equipment and service trucks

Series SWC509 is a flexible, lightweight high pressure suction and discharge hose designed to handle brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries and water in harsh oil field bottom sediment and waste pit recovery applications. The corrugated hose construction incorporates a wire helix that provides full suction capability, flexibility, kink resistance, and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion and weathering. Series SWC509 is available in 200-foot continuous lengths.

NOTE:  Do not use with refined oil or fuel.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black nitrile

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black SBR; corrugated wrapped finish

Temperature:

-40°F to +160°F (-40°C to +71°C)

Packaging:

Coils

Branding:

PARKER SERIES SWC509 TITANFLEX® OIL FIELD VACUUM HOSE XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack Qty	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	(ft)
SWC509-1000	1	25.4	2	1.5	38.1	0.58	1	250	100	Request Quote
SWC509-1500	1-1/2	38.1	2	2.063	51.6	0.9	1.5	250	100	Request Quote
SWC509-2000	2	50.8	2	2.563	65	1.21	2	250	100	Request Quote
SWC509-2500	2-1/2	63.5	2	3.125	77	1.44	2.5	200	100	Request Quote
SWC509-3000	3	76.2	2	3.625	91	1.92	3	200	100	Request Quote
SWC509-4000	4	101.6	2	4.625	117	2.59	4	150	100	Request Quote
SWC509-6000	6	152.4	4	6.81	172.9	5.48	10	125	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.

---