Vendor: Parker Industrial

Category: Sanitary Food Grade    Sub Type: General Food Hose

---

Application:

Corrugated Food Suction Hose
Nitrile Tube
FDA, PMO, USDA, 3-A
Series SWC430

• Fatty and oily foods, liquids, milk, potable water, sanitary products
• In-plant and tank transfer
• Delivery, transport

Series SWC430 is a flexible suction and discharge hose designed to handle fatty and oily foods, liquids, sanitary products and potable water in a variety of transfer applications. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth, bacteria-free tube that will not impart taste or odor. The tube cleans easily with 10% alkali bath, hot water, or open-end low pressure steam to 15 psi (1.0 bar). The lightweight corrugated construction incorporates a dual wire helix that provides full suction capability, kink resistance and additional flexibility for ease of handling, and a path to conduct a static electrical charge to ground. The nitrile cover is resistant to abrasion and oil.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  FDA, PMO, USDA, 3-A

Tube:

White nitrile

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Gray nitrile; corrugated wrapped finish

Temperature:

-20°F to +225°F (-29°C to +107°C)

Packaging:

Coils

Branding:

PARKER SERIES SWC430 CORRUGATED FOOD GRADE SUCTION & DISCHARGE HOSE MEETS FDA/3-A/USDA/PMO REQUIREMENTS (3-A LOGO) XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Gray with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
SWC430-2000	2	50.8	2	2.625	66.7	1.46	5	150	100	Request Quote
SWC430-3000	3	76.2	2	3.688	93.7	2.39	6	150	100	Request Quote
SWC430-4000	4	101.6	2	4.813	122.2	3.68	8	150	100	Request Quote
SWC430-6000	6	152.4	2	6.75	171.5	5.86	12	100	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.

---