Vendor: Parker Industrial

Category: Sanitary Food Grade    Sub Type: General Food Hose

---

Application:

TITANFLEX® Food Suction Hose
Nitrile Tube
FDA, PMO, USDA, 3-A
Series SW640

• Fatty and oily foods, liquids, milk, potable water, sanitary products
• In-plant and tank transfer
• Delivery, transport

Series SW640 is an extremely flexible, kink resistant suction and discharge hose designed to handle dry materials, fatty and oily foods, liquids, sanitary products and potable water in a variety of transfer applications. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth, bacteria-free tube that will not impart taste or odor. The tube cleans easily with 10% alkali bath, hot water, or open-end low pressure steam to 15 psi (1.0 bar). The lightweight construction incorporates a dual wire helix that provides full suction capability, kink resistance and a path to conduct a static electrical charge to ground. The nitrile cover is resistant to abrasion and oil.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  FDA, PMO, USDA, 3-A

Tube:

White nitrile

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Gray nitrile; wrapped finish

Temperature:

-20°F to +225°F (-29°C to +107°C)

Packaging:

Coils

Branding:

PARKER SERIES SW640 TITANFLEX® NITRILE FOOD SUCTION MEETS FDA/3-A/USDA/PMO REQUIREMENTS (3-A LOGO) XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Gray with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
SW640-1500	1-1/2	38.1	2	2	50.8	0.95	5	250	100	Request Quote
SW640-2000	2	50.8	2	2.5	63.5	1.29	6	250	100	Request Quote
SW640-2500	2-1/2	63.5	2	3	76.2	1.58	7	200	100	Request Quote
SW640-3000	3	76.2	2	3.625	92.1	2.05	8	200	100	Request Quote
SW640-4000	4	101.6	2	4.688	119.1	3.14	11	200	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.

---