Vendor: Parker Industrial

Category: Chemical Hose    Sub Type: Chemical Transfer Hose

---

Application:

TITANFLEX® FEP Chemical Hose
FDA, USDA, 3-A
Series SW574

• Non-fatty and non-oily foods and liquids, potable water, sanitary products
• Acids, chemicals, solvents
• In-plant and tank transfer, delivery, transport

Series SW574 is a flexible, lightweight, premium quality suction and discharge hose designed for use in high temperature, high pressure chemical and purity applications. The fluorinated ethylene propylene (FEP) tube is compatible with 99.5% of commonly used chemicals and solvents, as well as food, pharmaceutical and sanitary materials. The tube also has an elevated temperature rating of 300°F (149°C), will not leach into and contaminate the product being conveyed, and meets FDA, USDA and 3-A requirements. The special construction incorporates a dual wire helix that provides full suction capability, superior force-to-bend and kink resistance and a path to conduct a static electrical charge to ground. The EPDM cover is resistant to abrasion, mild chemicals and ozone.

NOTE: Contact JGB for additional chemical compatibility information.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  FDA, USDA, 3-A

Tube:

White fluorinated ethylene propylene (FEP)

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Blue EPDM; wrapped finish

Temperature:

-40°F to +300°F (-40°C to +149°C)

Packaging:

Coils

Branding:

PARKER SERIES SW574 TITANFLEX® FEP CHEMICAL/FOOD QUALITY HOSE XXX PSI MEETS FDA/3-A/USDA REQUIREMENTS (3-A LOGO) MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Part Number	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
SW574-1000	1	25.4	2	1.469	37.3	0.52	2.5	400	100	Request Quote
SW574-1500	1-1/2	38.1	2	2.031	51.6	0.81	4	300	100	Request Quote
SW574-2000	2	50.8	2	2.531	64.3	1.11	6.5	300	100	Request Quote
SW574-3000	3	76.2	2	3.688	93.7	2.17	12	200	100	Request Quote
SW574-4000	4	101.6	2	4.688	119.1	3.03	18	200	100	Request Quote
SW574-750	3/4	19.1	2	1.281	32.5	0.48	2	400	100	Request Quote

WARNINGS! It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact JGB for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature. At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines. Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube.

---