Continental ContiTech - Desert DR5 SAE 100R5 Fleet Application Hydraulic Hose
Vendor: Continental ContiTech
Category: Hydraulic Hose
Application:
High temperature, medium pressure hose for use in applications including turbocharger oil lines, tilt cab cylinder and air brake lines, transmission coolant and filtration lines. Compatible with petroleum oil and phosphate ester–based hydraulic fluids, air, water, diesel fuel, petroleum based lubricating oils and coolants. Note: Not recommended for under-the-hood, automotive and truck fuel line applications. Only hoses designed and tested to meet SAE fuel line standards should be used for these applications.
Note: Sizes 7/8" (-16) and 1a" (-20) do not meet SAE J1402 Type AII & DOT FMVSS 106 Type AII because these sizes are not listed in the referenced specifications.
- Meets or exceeds the performance requirements of: SAE 100R5; SAE J1402 Type All, DOT FMVSS 106 Type All
- High Temperature
- SAE J1942/U.S. Coast Guard
Tube:
CPE
Reinforcement:
One braid textile, one braid steel
Cover:
Blue impregnated textile braid
Temperature:
SAE 100R5 Hydraulic Applications: -40°F to 302°F (-40°C to 150°C)
Air Brake Applications: -40°F to 200°F (-40°C to 93°C)
General Hot Oil Applications: -40°F to 300°F (-40°C to 150°C)
Branding:
Example: Continental ContiTech DR5-06 SAE 8 mm (5/16") SAE 100R5 (DOT FMVSS 106 AII, J1402 AIR BRAKE) 15.5 MPa (2250 psi) W.P. GY Made in U.S.A.
Couplings:
Contact JGB for proper fitting recommendation and coupling procedure.
| Product # | SAP # | ID | OD | Max. WP | Min. Bend Radius |
Min. Burst Pressure |
Weight | USCG Approved |
Request a Quote | |||||
| in. | mm | in. | mm | psi | MPa | in. | mm | psi | MPa | lbs./ft. | ||||
| DR5-04 | 20340705 | 3/16 | 4.8 | 0.52 | 13.2 | 3000 | 20.7 | 3.0 | 76 | 12000 | 82.7 | 0.15 | H | Request Quote |
| DR5-05 | 20341023 | 1/4 | 6.4 | 0.58 | 14.8 | 3000 | 20.7 | 3.4 | 86 | 12000 | 82.7 | 0.18 | H | Request Quote |
| DR5-06 | 20340706 | 5/16 | 7.9 | 0.68 | 17.1 | 2250 | 15.5 | 4.0 | 102 | 9000 | 62.1 | 0.22 | H | Request Quote |
| DR5-08 | 20340707 | 13/32 | 10.3 | 0.77 | 19.5 | 2000 | 13.8 | 4.5 | 117 | 8000 | 55.2 | 0.30 | H | Request Quote |
| DR5-10 | 20340708 | 1/2 | 12.7 | 0.92 | 23.4 | 1750 | 12.1 | 5.5 | 140 | 7000 | 48.3 | 0.37 | H | Request Quote |
| DR5-12 | 20341025 | 5/8 | 15.9 | 1.08 | 27.4 | 1500 | 10.3 | 6.5 | 165 | 6000 | 41.4 | 0.45 | H | Request Quote |
| DR5-16 | 20340709 | 7/8 | 22.2 | 1.24 | 31.4 | 800 | 5.5 | 7.4 | 187 | 3200 | 22.1 | 0.47 | H | Request Quote |
| DR5-20 | 20368015 | 1a | 28.6 | 1.50 | 38.1 | 625 | 4.3 | 9.0 | 229 | 2500 | 17.2 | 0.58 | H | Request Quote |
*** Note: Assemblies made with Continental ContiTech’s DR5 hose and Continental ContiTech’ Field Grip® or Uni-Crimp® fittings meet SAE J1402 and DOT FMVSS 571.106 specifications. For high pressure hydraulic applications use the Uni-Crimp® fitting which meets SAE J517 100R5 assembly requirements.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |