Thermoid - PILE DRIVER STEAM
Vendor: Thermoid
Category: Steam Hose
Application:
Pile Driver Steam hose is recommended for
those applications where there is saturated
steam service to +388°F on driving systems. This
hose features an EPDM tube that is specifically
compounded to resist permeation and prevent
premature failure. The multiple plies of tire cord
with plated steel cable reinforcement enable this
hose to maintain a working pressure of 200 psi
regardless which size hose you are using.
Oil Resistance: Limited
Tube:
EPDM, also available in CR for oil resistance
Reinforcement:
Multiple plies tire cord and plated steel cable
Cover:
EPDM, also available in CR for oil resistance
Temperature:
Saturated steam service to +388°F (+198°C)
Packaging:
100 ft. maximum
Branding:
Thermoid HBD Industries Pile Driver Steam Hose 200 PSI WP Serial Number Made In USA
Couplings:
Contact JGB for proper hose fitting recommendation and coupling procedure.
Colors:
Black
STEAM HOSE WARNING
Steam heat is hotter than boiling water (212°F, 100°C) and increases in temperature as pressure increases. The danger from steam in industrial applications is due to the great heat and pressures involved. Water changes to steam at higher temperatures when under pressure. If the steam escapes, massive quantities of heat are released. This, combined with high pressures, can prove to be dangerous for the operator. Use only steam hoses designed for these applications. A steam hose should never be used to carry pressures or temperatures higher than it is rated to handle, in spite of any safety factor.
 |
The dotted line shows the process of saturated steam being transformed into superheated steam. If a steam line is at a pressure of 150 psi, and a temperature of 366°F, it contains saturated steam. If the pressure is substantially reduced by the expansion of the steam (such as the sudden opening of a valve or the steam passing into a larger pipe or hose), the condition of the steam follows the dotted line to some point X in the superheated steam area. This condition may not last very long, but the superheated steam tends to deteriorate the tube stock in ordinary steam hose intended for use with saturated steam. This usually results in hose failure. |
| Product Number | Nominal I.D. | Nominal O.D. | Braids | Working Pressure | Min Bend Radius | Weight | Request a Quote | |||||
| in. | mm | in. | mm | psi | Mpa | in. | mm | lb/ft | Kg/m | |||
| 34854634002 | 2 | 50.80 | 3.13 | 79.38 | 4 | 200 | 1.38 | 20.00 | 508.00 | 4.10 | 6.10 | Request Quote |
| 34854636002 | 2-1/2 | 63.50 | 3.38 | 85.73 | 4 | 200 | 1.38 | 25.00 | 635.00 | 5.40 | 8.04 | Request Quote |
| 34854638002 | 3 | 76.20 | 4.50 | 114.30 | 4 | 200 | 1.38 | 30.00 | 762.00 | 6.40 | 9.52 | Request Quote |
| 34854640002 | 4 | 101.60 | 5.63 | 142.88 | 4 | 200 | 1.38 | 40.00 | 1016.00 | 9.30 | 13.84 | Request Quote |
| 34854642002 | 6 | 152.40 | 7.81 | 198.44 | 6 | 200 | 1.38 | 60.00 | 1524.00 | 18.60 | 27.68 | Request Quote |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |