Aeroquip - 2808 PTFE Hose
Vendor: Aeroquip
Category: Special Application
Application:
Hot air, steam and most chemical applications. Not recommended for steam-cold water cycling.
Tube:
Extruded PTFE tube
Cover:
Double stainless steel braids
Temperature:
–100°F to +500°F (–73°C to +260°C).
Couplings:
Contact JGB for proper fitting recommendation and coupling procedure.
| Part Number | Hose I.D. | Hose O.D. | Maximum Operating Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
Vacuum Service |
Weight of Hose |
Request a Quote | |||||||
| mm | in | mm | in | bar | psi | bar | psi | mm | in | kPa | in/Hg | Kg/m | lbs/ft | ||
| 2808-08 | 10,7 | 0.42 | 14,7 | 0.58 | 190,0 | 2750 | 758,0 | 11000 | 117,3 | 4.62 | 94,8‡ | 28‡ | 0,30 | 0.20 | Request Quote |
| 2808-10 | 12,9 | 0.51 | 17,3 | 0.68 | 172,0 | 2500 | 689,0 | 10000 | 139,7 | 5.50 | 94,8‡ | 28‡ | 0,39 | 0.26 | Request Quote |
| 2808-12 | 16,5 | 0.65 | 20,6 | 0.81 | 121,0 | 1750 | 483,0 | 7000 | 165,1 | 6.50 | 67,7‡ | 20‡ | 0,45 | 0.30 | Request Quote |
| 2808-16 | 22,3 | 0.88 | 27,7 | 1.09 | 103,0 | 1500 | 414,0 | 6000 | 187,4 | 7.38 | 50,8‡ | 15‡ | 0,65 | 0.44 | Request Quote |
| 2808-20 | 28,4 | 1.12 | 34,3 | 1.35 | 78,0 | 1125 | 310,0 | 4500 | 279,4 | 11.00 | 50,8‡ | 15‡ | 0,85 | 0.57 | Request Quote |
| 2808-24 | 35,0 | 1.38 | 41,1 | 1.62 | 55,0 | 800 | 221,0 | 3200 | 355,6 | 14.00 | 50,8‡ | 15‡ | 1,04 | 0.70 | Request Quote |
‡ Maximum negative pressure for -08 and larger
are suitable for hose which has suffered no external
damage or kinking. If greater negative pressures are
required for -08 and larger hoses, the use of an internal
support coil is recommended. Use of an internal support coil
in -08 and larger PTFE hose is recommended for tube support
where extended or continuous service at high temperature
together with low or negative pressure is expected.
are suitable for hose which has suffered no external
damage or kinking. If greater negative pressures are
required for -08 and larger hoses, the use of an internal
support coil is recommended. Use of an internal support coil
in -08 and larger PTFE hose is recommended for tube support
where extended or continuous service at high temperature
together with low or negative pressure is expected.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |