Vendor: Gates

Category: Oil Hose (Suction and Discharge)
Category: Suction & Discharge    Sub Type: Oil Hose Suction & Discharge

---

Application:

Used as a flexible connection between the cementing pump manifold and cementing head for conveyance of cement slurries at high pressure.

Tube:

Type C (Nitrile). Black. Specially compounded for handling abrasion and corrosion.

Reinforcement:

Multiple layers of spiraled high tensile steel wire.

Cover:

Type L (MegaTuff®). Black. Oil and abrasion resistant.

Temperature:

-4°F to +250°F (-20°C to +121°C) continuous service.

Packaging:

Each length packaged in a carton.

Couplings:

Contact JGB for proper hose fitting requirements.

Category:

Oilfield Hose

Colors:

Black with black cover

Options:

Accessories such as SAFETY CLAMPS, HOSE LIFT EYE & COLLAR CLAMP and STAINLESS STEEL ARMOR are available.

Fittings:
Branding:	One continuous longitudinal yellow transfer label (with serial number and code date embossed). Example: "GATES® BLACK GOLD® CEMENTING NOT FOR SOUR SERVICE 2 INCH MAX WP 10000 PSI TESTED TO 15000 PSI FSL 0 TEMP RANGE III ISO 14693 LICENSE 7K-0003 MADE IN U.S.A."
Standards:	API (American Petroleum Institute) Spec 7K. Coupling/Mat’l Traceability (Additional Cost) ISO 14693 Letter of Conformance (Additional Cost) Test Certificates 3rd Party Witness Test (Additional Cost) ABS/CDS Type Approval

Safety Clamp & Chain Part No.	Nom. I.D.	Nom. O.D.	Min. Bend Radius (Inches)	Wt. per Ft. of hose (Lbs)	Crimped Cplg. Wts. (Lbs) 1502 Hammer Union Assy.		Maximum length of hose (Feet)	Request Quote
5,000 psi W.P. – 10,000 Test – 12,500 Minimum Burst
7361-6550	2	2.80	48	4.66	Female Sub/Seal 741-1569 (7.8 Lbs.)	Male Sub/Nut 7341-1571 (17.71 Lbs.)	200	Request Quote

---