180 degrees Aluminum Rack and Pinion Actuator / Double Acting
Vendor: Bradford
Valve Type(s):
Miscellaneous Valves and Accessories
Valve Description:
- NAMUR VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid valves, limit switches or positioners.
- The standard angle of rotation is 180°. Additional travel rotations of 120°, 135°, 150° are available. MA016 and larger sizes feature a travel stop with ± 10° adjustment in both open and close directions (International Patent).
- The 'patent pending' bottom plate design, unique to Dixon Sanitary secures a captive pinion (anti-blowout system) and permits flexibility in mounting by retaining AISI 304 nuts (standard) or AISI 304 bolts (optional) In either dual ISO patterns, or to customer dimensions
- All pinions are supplied with anti-blowout retention in both directions
- The female pinion drive Is standard with a double square output drive and optional with a double-D drive, keyed drive and designs to meet your specific requirements
- Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle applications
- The pinion teeth are engaged for the full length and stroke of the piston. The pinion height allows manual override without disturbing the position Indication
- Extruded aluminum body is internally machined and lapped to exact specifications. All internal and external surfaces are anodized for corrosion resistance
- External open/closed indicator Is standard, available for all rotations
- Pistons incorporate double wear pads to separate the rack from the actuator wall and serve as both guide and wear bearings
- Epoxy coated special steel springs are pre-loaded with non-metallic materials. The stainless steel end cap fasteners are extra long to allow for spring relaxation, all parts are corrosion resistant
- Air pressure operation from 40 to 150 PSI. Water, nitrogen and compatible hydraulic fluids may as be used to power the actuator
- All external fasteners are corrosion resistant stainless steel
- All units are permanently lubricated at the factory with non-silicone grease
- All units are externally stamped with a progressive traceable serial number
- 100% of all units are factory pressure and leak tested
| Specifications | |
| Operating pressure range | 40 to 120 PSIG |
| Maximum allowable working pressure | 150 PSIG |
| Operating media | Dry or lubricated non-corrosive gas |
| Operating temperature standard | -40°F to 176°F |
| Piston and pinion lubrication | Non-silicone grease |
| Range of rotation adjustment | Between 170° and 190° |
| Valve and accessory mounting | Standard ISO 5211 bolt patterns |
| Output shaft | Female – Double square |
| Design | Twin rack and pinion |
| Factory testing cycles | 1 million |
Valve Category:
Aluminum Rack and Pinion Actuator
Valve Subcategory
Aluminum Rack and Pinion Actuator
| Part # | Dimensions (inches) | Request a Quote | |||||||||||
| A | B | C | D (mm) | E (mm) | F | G | H | I | K | L | M | ||
| RP-MA-012-DA | 4.7 | 2.6 | 2.8 | 11 | 11 | n/a | F04 | 1.9 | 0.5 | 4 | 2.1 | 0.5 | Request Quote |
| RP-MA-016-DA | 9.2 | 3.3 | 3.5 | 14 | 14 | n/a | F05 | 1.7 | 0.5 | 4.8 | 2.8 | 0.7 | Request Quote |
| RP-MA-017-DA | 10.8 | 3.3 | 3.5 | 14 | 14 | n/a | F05 | 1.7 | 0.5 | 4.8 | 2.8 | 0.8 | Request Quote |
| RP-MA-021-DA | 9.9 | 3.8 | 4.5 | 17 | 17 | n/a | F07 | 1.8 | 0.6 | 5.6 | 3.4 | 0.9 | Request Quote |
| RP-MA-026-DA | 13 | 3.8 | 4.4 | 17 | 17 | n/a | F07 | 1.8 | 0.8 | 5.6 | 3.4 | 0.9 | Request Quote |
| RP-MA-031-DA | 13 | 4.5 | 5.2 | 17 | 17 | n/a | F07 | 2.3 | 0.8 | 6.4 | 4.1 | 0.9 | Request Quote |
| RP-MA-036-DA | 13.7 | 5.4 | 6.5 | 22 | 22 | F07 | F10 | 2.6 | 0.8 | 7.7 | 5.2 | 1.2 | Request Quote |
| RP-MA-041-DA | 15.8 | 5.4 | 6.5 | 22 | 22 | F07 | F10 | 2.6 | 1.1 | 7.7 | 5.2 | 1.2 | Request Quote |
| RP-MA-046-DA | 20 | 5.9 | 7 | 22 | 22 | F07 | F10 | 3 | 1.1 | 8.2 | 5.7 | 1.2 | Request Quote |
| RP-MA-051-DA | 19.6 | 7.3 | 8.5 | 27 | 27 | n/a | F12 | 4 | 1.1 | 9.8 | 7.2 | 1.5 | Request Quote |
| RP-MA-056-DA | 23.9 | 7.3 | 8.5 | 27 | 27 | n/a | F12 | 4 | 1.1 | 9.8 | 7.2 | 1.5 | Request Quote |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |