Holmbury / VPC Series

Vendor: Holmbury

Valve Type(s):
Miscellaneous Valves and Accessories

Valve Description:

INTRODUCTION
Holmbury Hose Burst Valves are used to prevent the uncontrolled descent of a load in the event of a hose failure.
They should be screwed directly into the lifting device (normally a cylinder), or into an in-line manifold that should be mounted as close as possible to the lifting device.
A flow regulator valve, set at least 50% higher than the regulated flow, should be fitted downstream from the hose burst valve at the end of the flexible hose.

OPERATION The valve disk is held apart from the flow block with a spring fitted over the centre stem of the valve.
Apart from a small pressure , fluid can flow freely in the direction from Z to Z1.
When fluid is flowing in the reverse direction, from Z1 to Z, if the flow rate exceeds the valve setting (see dimension T and adjustment graph), the valve disk will snap shut and close the ports of the flow block.

APPLICATIONS
Lifting equipment and machinery where it is necessary to safeguard against excessive flow rates.

MATERIALS
Zinc plated carbon steel body.

TECHNICAL DETAILS
Maximum working pressure for all sizes is 350 bar.

Valve Category:

Hose Burst Valves

Valve Subcategory