Morrison Bros. Series 9095AA Overfill Prevention Valve

Valve Category:

Overfill Prevention Valves

Manufacturer

Morrison Bros. Co.

The 9095AA overfill prevention valve is designed to prevent overfilling storage tanks by
providing a positive shut-off during a pressurized fill. The valve installs at the fill port of a storage
tank and can be set to the desired shut-off level by using standard length pipe nipples. Anodized
aluminum construction increase the matrix of fuel compatibility.

Features:

• Tight fill connection required. Top fill, remote fill, and dry disconnect connections available
• Installs on 6" schedule 40 NPT male riser connection
• Standard drop tubes (Morrison 419) are easily attached with included drop tube adaptor
• Field adjustable float (1½") for setting the precise level of shut-off
• Integral anti-siphon function
• Full flow to shut-off point
• Cushioned shut-off eliminates line shock
• Integral pressure relief feature allows for safe uncoupling at the completion of the fill operation
• Shut-off is activated by basic hydraulic principles
• 5 PSI and 5 GPM minimum flow requirements
• Typical flow rate is 550 GPM at 10 PSI pressure drop

A mechanical test mechanism is available as an option. The test mechanism allows a
technician to pull on the test line at any time during the filling process to actuate the float,
stop the fill, and verify the valve is working properly.

Construction Details Adaptor... Anodized aluminum Female adaptor... Ductile iron Body... Anodized aluminum Plunger and dashpot... Anodized aluminum Shaft, linkage and hardware...Stainless steel Piping... Steel (e-coated)			Certifications & Listings NFPA 30, 30A, UFC, BOCA, SBCCI/SFC and PEI RP200
NOTE For use on clean product only. Not suitable for motor oil.