Dixon Bayco / 390 Series Butterfly Valves
Valve Category:
Dry Bulk Products
Valve Subcategory
300 Series Butterfly Valves
Manufacturer
Dixon
| Request Quote |
Housing: Aluminum
Discs: Type 316 stainless
Body Screws: Cadmium plated steel
Stem Packing: Buna-N
Stem Bushings: Thermal plastic polymer, top and bottom
Resilient Seat: Nitrile
Handle: High strength 713 alloy aluminum with retrogressive reaging process - stronger than industry standard cast iron handles. Stainless steel spring and locking lever pin.
Throttling Plate: Five position, high strength aluminum alloy
Discs: Type 316 stainless
Body Screws: Cadmium plated steel
Stem Packing: Buna-N
Stem Bushings: Thermal plastic polymer, top and bottom
Resilient Seat: Nitrile
Handle: High strength 713 alloy aluminum with retrogressive reaging process - stronger than industry standard cast iron handles. Stainless steel spring and locking lever pin.
Throttling Plate: Five position, high strength aluminum alloy
Stainless Steel
- Two piece aluminum body
- One piece 316 stainless steel disc and stem
- Nitrile, FDA approved white seat
| Stainless Steel | |
| Size | Part # |
| Complete Valve with 316 Stainless Steel Disc | |
| 3" | 3-390-828501 |
| 4" | 4-390-828U501 |
| 5" | 5-390-828U501 |
| 6" | 6-390-828U501* |
| 316 Stainless Steel Replacement Discs | |
| 3" | 3-390-209F |
| 4" | 4-390-209U |
| 5" | 5-390-209U |
| 6" | 6-390-209U |
| White Replacement Nitrile Seats | |
| 3" | 3-400-422501** |
| 4" | 4-400-422501** |
| 5" | 5-400-422501** |
| 6" | 6-390-393501 |
* 6" 390 series, uses special handle 400-206-65 or 400-237-610, see below.
** 3" thru 5" seats are interchangeable with the 400 series.
** 3" thru 5" seats are interchangeable with the 400 series.
| Dimensions and Weights | ||||||||||
| Size (in) | A | B | C | D | E | F | G | H | Q | Lbs. |
| 3 | 4.000 | .375 | .563 | 1.250 | 4.875 | 5.375 | 3.125 | 1.750 | 2.875 | 4 |
| 4 | 4.000 | .438 | .625 | 1.250 | 6.000 | 6.875 | 4.125 | 2.000 | 3.875 | 7 |
| 5 | 4.000 | .438 | .625 | 1.250 | 6.000 | 7.625 | 5.188 | 2.125 | 5.000 | 9 |
| 6 | 4.000 | .438 | .625 | 1.250 | 6.500 | 8.750 | 6.125 | 2.125 | 6.000 | 9 |
Notes:
- All dimensions are given in inches.
- Q dimension is the minimum allowable inside diameter of the pipe or mating flange.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |