Aeroquip
2808 PTFE Hose

Application:

Hot air, steam and most chemical applications. Not recommended for steam-cold water cycling.

Tube:

Extruded PTFE tube

Cover:

Double stainless steel braids

Temperature:

–100°F to +500°F (–73°C to +260°C).

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Part Number	Hose I.D.		Hose O.D.		Maximum Operating Pressure		Minimum Burst Pressure		Minimum Bend Radius		Vacuum Service		Weight of Hose		Request a Quote
Part Number	mm	in	mm	in	bar	psi	bar	psi	mm	in	kPa	in/Hg	Kg/m	lbs/ft	Request a Quote
2808-08	10,7	0.42	14,7	0.58	190,0	2750	758,0	11000	117,3	4.62	94,8‡	28‡	0,30	0.20	Request Quote
2808-10	12,9	0.51	17,3	0.68	172,0	2500	689,0	10000	139,7	5.50	94,8‡	28‡	0,39	0.26	Request Quote
2808-12	16,5	0.65	20,6	0.81	121,0	1750	483,0	7000	165,1	6.50	67,7‡	20‡	0,45	0.30	Request Quote
2808-16	22,3	0.88	27,7	1.09	103,0	1500	414,0	6000	187,4	7.38	50,8‡	15‡	0,65	0.44	Request Quote
2808-20	28,4	1.12	34,3	1.35	78,0	1125	310,0	4500	279,4	11.00	50,8‡	15‡	0,85	0.57	Request Quote
2808-24	35,0	1.38	41,1	1.62	55,0	800	221,0	3200	355,6	14.00	50,8‡	15‡	1,04	0.70	Request Quote

‡ Maximum negative pressure for -08 and larger
are suitable for hose which has suffered no external
damage or kinking. If greater negative pressures are
required for -08 and larger hoses, the use of an internal
support coil is recommended. Use of an internal support coil
in -08 and larger PTFE hose is recommended for tube support
where extended or continuous service at high temperature
together with low or negative pressure is expected.