Parker Industrial
WAVEMASTER Marine Barrier Fuel Line / Vent Hose - Series 7165

Types:
Marine Hose

Vendor: Parker Industrial

Application:

WAVEMASTER™ Marine Barrier Fuel Line / Vent Hose ABYC, CARB, CE, EPA, ISO, NMMA, SAE, USCG
Series 7165

• Biodiesel (to B100 in dedicated and non-dedicated service), diesel, ethanol, gasoline, oil
• Marine fuel/vent systems

Series 7165 is a premium, low permeation fuel tank feed and vent hose for refined fuels such as biodiesel (to B100 in dedicated and non-dedicated service), alcohol blended fuels, diesel, ethanol and gasoline in marine applications. The hose incorporates a thermoplastic barrier to resist fuel permeation and the cover is resistant to abrasion, oil and weathering. Series 7165 is flexible for easy routing in engine compartments and as a feed line to fuel tanks where liquid fuel is continuously in the hose under normal conditions.

Design Factor:  4:1
Vacuum:  Not recommended
Industry Standards:  ABYC, CARB, CE, EPA, ISO 7840 A1, NMMA, SAE J1527 A1-15, USCG A1

Tube:

Translucent nylon

Reinforcement:

Multiple textile plies

Cover:

Black nitrile/PVC; smooth finish

Temperature:

-20°F to +212°F (-29°C to +100°C)

Packaging:

Reels

Branding:

PARKER SERIES 7165 WAVEMASTER MARINE FUEL HOSE – EPA COMPLIANT – (x)9PKHPLINE165 – SAE J1527 USCG TYPE A1-15 ISO 7840 A1 CE NMMA TYPE ACCEPTED (ID) USA PH USE WITH ABYC COMPLIANT SYSTEMS AND FITTINGS ONLY (DATE CODE)
NOTE: (x) changes every year

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
7165-25250	1/4	6.3	2	0.536	13.6	0.11	2.5	100	250	Request Quote
7165-31250	5/16	7.9	2	0.611	15.5	0.13	2.5	100	250	Request Quote
7165-38250	3/8	9.5	2	0.681	17.3	0.16	2.5	100	250	Request Quote
7165-50250	1/2	12.7	2	0.821	20.9	0.2	4.5	100	250	Request Quote
7165-63250	5/8	16	2	1	25.4	0.3	4.5	75	250	Request Quote

Warnings! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.