Parker Industrial
FEP Chemical and Food Suction Hose - Series SW373

Types:
Sanitary Food Grade Sub Type: General Food Hose

Vendor: Parker Industrial

Application:

FEP Chemical and Food Suction Hose
FDA, USDA, 3-A
Series SW373

Non-fatty and non-oily foods and liquids, potable water, sanitary products
Acids, chemicals, solvents
In-plant and tank transfer, delivery, transport

Series SW373 is a premium quality, high pressure, high temperature suction and discharge hose designed to handle approximately 99.5% of commonly used acids, chemicals and solvents, as well as food and sanitary materials. The fluorinated ethylene propylene (FEP) tube meets FDA, USDA and 3-A requirements, will not leach into and contaminate the product being conveyed, and features a temperature rating to 300°F (149°C). The hose construction incorporates a dual wire helix that provides full suction capability, kink resistance and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, mild chemicals and ozone.

Design Factor: 4:1
Vacuum: Full
Industry Standards: FDA, USDA, 3-A

Tube:

White fluorinated ethylene propylene (FEP)

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Yellow EPDM; wrapped finish

Temperature:

-40°F to +300°F (-40°C to +149°C)

Packaging:

Coils

Branding:

PARKER SERIES SW373 FEP HOSE MEETS FDA, 3-A & USDA REQUIREMENTS XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Yellow with red stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
Part No.	(in)	(mm)	Reinf Plies	(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)	Request Quote
SW373-1000	1	25.4	2	1.531	38.9	0.69	9	400	100	Request Quote
SW373-1250	1-1/4	31.8	2	1.75	44.5	0.75	11	375	100	Request Quote
SW373-1500	1-1/2	38.1	2	2.125	54	1.11	12	350	100	Request Quote
SW373-2000	2	50.8	2	2.688	68.3	1.57	16	300	100	Request Quote
SW373-3000	3	76.2	4	3.875	98.4	2.86	30	200	100	Request Quote
SW373-4000	4	101.6	4	5	127	4.28	42	150	100	Request Quote
SW373-500	1/2	12.7	2	0.969	24.6	0.37	7	500	100	Request Quote
SW373-750	3/4	19.1	2	1.25	31.8	0.55	8	500	100	Request Quote

Warning!

It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact JGB for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature.
At operating temperatures of 125°F (52°C) and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube.