Manuli Rubber Industries
Pushfit

Types:
Hydraulic Hose

Vendor: Manuli Rubber Industries

Application:

PUSH-ON HOSE, SAE J30 R6

Push-on hose for low pressure lines, return lines, drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off-highway, vehicles), stationary and marine applications.


KEY PERFORMANCE

• Push-on hose with MF2000® Push-Lock type without ferrule
• High aging resistance 
• Fuel application with push-on fittings (clamps recommended in fuel applications)

Tube:

Fuel and oil resistant synthetic rubber compound

Reinforcement:

One textile braid (1TB)

Cover:

Environment resistant synthetic rubber

Temperature:

CONTINUOUS SERVICE -40°F/+212°F or -40°C/+100°C
MAX OPERATING TEMPERATURE (Intermittent service) 250°F / 121°C

Recommended Fluids:	Mineral oils, vegetable and rape seed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in aqueous emulsion, water, diesel fuel, gasoline
Insert:	MF2000® - PUSH-LOCK TYPE
Applicable Specs.:	SAE J30 R6
Type Approvals:	GOST-R

PART. REF.	HOSE SIZE			R.O.D.		O.D.		MAX W.P.		BURST PRESSURE		MIN. BEND RADIUS		WEIGHT		FITTING	Request Quote
	DN	dash	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	g/m	lb/ft
H09066006	6	-4	1/4	-	-	12,7	0,50	35	510	140	2030	76	2,99	130	0,09	MF2000®PUSH-LOCK	Request Quote
H09066008	8	-5	5/16	-	-	14,3	0,56	35	510	140	2030	76	2,99	160	0,11	MF2000®PUSH-LOCK	Request Quote
H09066010	10	-6	3/8	-	-	15,8	0,62	35	510	140	2030	76	2,99	175	0,12	MF2000®PUSH-LOCK	Request Quote
H09066012	12	-8	1/2	-	-	19,6	0,77	25	360	100	1450	127	5,00	235	0,16	MF2000®PUSH-LOCK	Request Quote
H09066016	16	-10	5/8	-	-	23,6	0,93	25	360	100	1450	150	5,91	320	0,21	MF2000®PUSH-LOCK	Request Quote
H09066019	19	-12	3/4	-	-	28,3	1,11	21	300	84	1210	180	7,09	470	0,31	MF2000®PUSH-LOCK	Request Quote
H09066025	25	-16	1	-	-	33,9	1,33	14	200	56	810	240	9,45	525	0,35	MF2000®PUSH-LOCK	Request Quote