Parker Industrial
Beverage and Potable Water Discharge Hose - Series SS290

Types:
Sanitary Food Grade     Sub Type: General Food Hose

Vendor: Parker Industrial

Application:

Beverage and Potable Water Discharge Hose
Nitrile Tube
FDA, PMO, USDA, 3-A
Series SS290

• Beverages, liquids, milk, potable water
• In-plant and tank transfer
• Delivery, transport

Series SS290 is a high pressure discharge hose designed to handle beverages, liquids and potable water in a variety of transfer applications. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth, bacteria-free tube that will not impart taste or odor. The tube cleans easily with 10% alkali bath, hot water, or open-end low pressure steam to 15 psi (1.0 bar). The lightweight construction provides flexibility for ease of handling. The natural rubber cover is resistant to abrasion, mild chemicals and ozone.

NOTE:
Do not for use in applications where a static charge may develop unless externally grounded.

Design Factor:  4:1
Vacuum:  Not recommended
Industry Standards:  FDA, PMO, USDA, 3-A

Tube:

White nitrile

Reinforcement:

Multiple textile plies

Cover:

Gray natural rubber; wrapped finish

Temperature:

-20°F to +225°F (-29°C to +107°C)

Packaging:

Coils

Branding:

PARKER SERIES SS290 BEVERAGE & POTABLE WATER HOSE MEETS FDA/3-A/USDA/PMO REQUIREMENTS (3-A LOGO) 250 PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Gray with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Approx Wt	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(kg/ft)	(psi)	Qty (ft)
SS290-1500	1-1/2	38.1	4	2.125	54.0	0.82	0.37	250	100	Request Quote
SS290-2000	2	50.8	4	2.625	66.7	1.10	0.50	250	100	Request Quote
SS290-2500	2-1/2	63.5	4	3.125	79.4	1.39	0.63	250	100	Request Quote
SS290-3000	3	76.2	4	3.625	92.1	1.64	0.74	250	100	Request Quote
SS290-4000	4	101.6	4	4.625	117.5	2.21	1.00	250	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.