Dixon Holedall Fittings
Dixon Holedall Coupling Machines

Vendor: Dixon Holedall Fittings

Coupling Type: Oil & Petroleum Couplings

Description:

15, 25, 50, 100, 350 Ton Ram

Coupling Category:

Holdall Fittings

Rams securely attach Holedall couplings to hose. Five machines meet every hose service requirement.

Rams, are powerful finely engineered machines designed specifically to externally swage and internally expand Holedall couplings by hydraulic pressure. Since each ram generates all the hydraulic pressure required to attach the Holedall coupling, one person can easily operate the equipment.

15 Ton Ram	25 Ton Ram
Specially designed ram for internally expanded couplings only. Bench mounted model (optional stand available), producing up to 10,000 PSI, for up to 15 tons of ram force. Capable of expanding 1" through 3" steel fittings and ¾" through 4" brass Holedall Petroleum fittings. The motor is ½ h.p., 115 volt 60 cycle, single phase with foot pedal.	Free standing model producing up to 10,000 PSI of line pressure for up to 25 tons of ram force. Capable of external swaging ¼" through 4" ID hose and internal expanding 5/8"through 4" ID hose, with proper equipment. The motor is ½ h.p., 115 volt 60 cycle, single phase with foot pedal. High speed pump kit option is available.

50 Ton Ram	100 Ton Ram
Bench mounted model (optional stand available), producing up to 10,000 PSI, for up to 50 tons of ram force. Capable of external swaging 1¼" through 6" ID hose and internal expanding 5/8" through 6" ID hose, with proper equipment. A 1-1/8 h.p., 115 volt, 60 cycle, single phase motor is standard with remote, (220/440 volt motors are available).	Used for externally swaging Holedall fittings to hose from1¼" through 10" ID With optional accessories, this ram maybe used for internally expanded couplings on hose from 1¼"through 6". This machine is capable of producing up to 100tons of ram force. A 1-1/8 h.p., 115 volt, 60 cycle, single phase motor is standard with remote, (220/440 volt motors are available).

300 Ton Ram

Used for externally swaging Holedall and Rotary fittings. This ram is capable of producing up to 354 tons of ram force for swaging. A 14" 150 lb. flange will fit through the bed plate. This ram has 36" of stroke. A 12.5 h.p., 230 volt, 60Hz, 3 phase motor is standard with remote.

All Rams require dies of the proper size to reduce the ferrule to the proper diameter for a good grip on the hose. Pushers of the proper size must be used on the end of the Ram to push the Holedall fitting through the die. Die and pusher selection depends on the sizes and types of hoses being coupled.