REQUEST A QUOTE
Download JGBHose from Apple App Store Download JGBHose from Google Play

Bradford
Bolted I-Line Clamps - 13ILB / Single bolt design

Bolted I-Line Clamps - 13ILB / Single bolt design

Vendor: Bradford

Coupling Type: Holedall & Sanitary Fittings

Description:

Bolted I-Line Clamps - 13ILB / Single bolt design

Coupling Category:

I-line Clamps / Sanitary Couplings

Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets, with proper installation of ferrules, assembly of joints and absence of shock pressure.
All ratings shown are dependent upon related components within the systems and proper installation.
For temperatures above 250°F, we recommend using only 13MHP clamps.
This information is only valid if Bradford™ clamps, ferrules and gaskets are used.
I-Line uses a male and female type connection which makes alignment easier.
Add a gasket from a number of elastomers and a special wing nut or bolted clamp to complete the connection.
This design has been preferred by the beverage industry for many years.
Dixon Sanitary offers a wide variety of I-Line fittings in 304 and 316L materials in sizes from 1" to 8".

Tube O.D. Dimension A Service Pressure Rating at 70°F * Service Pressure Rating at 250°F * Part Number
1"- 1½" 2.122 1220 PSI 1100 PSI 13ILB100-150
2" 2.654 900 PSI 830 PSI 13ILB200
2½" 3.185 720 PSI 660 PSI 13ILB250
3" 3.717 600 PSI 550 PSI 13ILB300
4" 4.820 570 PSI 525 PSI 13ILB400
* The nuts must be tightened to 20 ft.lbs.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov