Dixon Air Fittings
Dixon Wilkerson Compact Regulators

with Gauge - without Gauge

Air Fittings

0-125 PSI adjusting range
for 0-60 PSI adjusting range, add an L to the end of the part number
self-relieving standard
can be installed with the adjusting knob in any position
To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise.
two 1/4" NPT gauge ports standard on models without gauge,
one 1/4" NPT gauge port standard on models with gauge can be used for additional outlet ports
models supplied without gauge use a GC230 gauge
maximum operating conditions: 300 PSIG (20.7 bar) and 32°F to 150°F (0°C to 65.5°C)

0-125 PSI adjusting range
self-relieving standard
can be installed with the adjusting knob in any position
To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise.
Two 1/4" NPT gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges.
models supplied without gauge use a GC230 gauge
maximum operating conditions: 300 PSIG (20.7 bar) and 32°F to 150°F (0°C to 65.5°C)

FRL's are designed for air service only, unless otherwise indicated.

SCFM ratings at 100 PSIG inlet pressure.

   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov