Dixon Shank / Water Fittings
Dixon PF Shank King Combination Nipples
Vendor: Dixon Shank / Water Fittings
Coupling Type: Industrial / Specialty Couplings & Accessories
Description:
NPT end
Coupling Category:
Shank Type Fittings
- PF shank King Combination nipples have the same shank pattern as found on the PF style cam and groove fittings. This shank design was developed specifically for chemical transport hoses having Crosslinked Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes, where shank retention can be a problem when using conventional band clamps.
- recommended for discharge and suction service
- working pressure is given at 70°F maximum
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult the JGB for recommendations.
- Not intended for compressed air
NPT end
| Size | Working PSI | Plated Steel | 316 Stainless Steel |
| Part # | Part # | ||
| 2" | 250 | ST25PF | RST25PF |
| 3" | 125 | ST35PF | RST35PF |
| 4" | 100 | ST40PF | RST40PF |
| 6" | 75 | ST60PF | RST60PF |
Note: Beveled ends for welding are also available. Contact JGB for further
information.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |