Dixon Sanitary Fittings
Dixon Bradford™ Filters / Strainers

Request a Quote

Vendor: Dixon Sanitary Fittings

Coupling Type: Holedall & Sanitary Fittings

Description:

Inline - Side Entry

Coupling Category:

Sanitary Fittings

Product Specifications

Size range:

1" - 3" clamp

Type:

Inline
- short
- long

Side Entry
- long

Material:

316L stainless steel

Finish:

3A sanitary, ID and OD

What Are Filter / Strainers Used For?

Filter Definition

A filter uses a disposable media to remove finer particulate from the stream. Dixon Sanitary holds Authorization Number 1446 for the 3-A Sanitary Standard for Filters using Single Service Filter Media, Number: 10-4.

Strainer Definition

A strainer is a device used to separate solids from fluids. Here it is used for larger particulate matter from liquid or gas. It uses cleanable media.


Full Flow Filters - Can be equipped with a variety of filtering media, down to 40 microns, media includes polyester, cotton cheesecloth and nylon mesh.	Full Flow Coarse Strainers - 1/4" or 1/8" perforations.	Full Flow Fine/Medium Strainers - Can be equipped with a variety of mesh screens for removing finer particles (20 to 1130 mesh).

In-line Filter / Strainer - BSCCQ

In-line units ship standard with the following: spring, distributor cap, clamp gasket, 1/4" perforated back-up tube, inlet and outlet bodies and squeeze clamp
1/8" perforated back-up tube available, must specify when ordering
Bevel seat, I-line and weld ends available, call JGB for information

Size	A short	A long	B	Short Part #	Long Part #
1"	15.75	+	4.00	BSCCQ1-R100	+ -
1-1/2"	15.75	35.375	4.00	BSCCQ1-R150	BSCCQ2-R150
2"	15.75	35.375	4.00	BSCCQ1-R200	BSCCQ2-R200
2-1/2"	15.75	+	4.50	BSCCS1-R250	+ -
3"	15.75	35.375	4.50	BSCCS1-R300	BSCCS2-R300

Side-Entry Filter / Strainer - BSCCQ

Side entry units ship standard with the following: spring, end cap with handle, distributor cap, clamp gasket, 1/4" perforated back-up tube, body and squeeze clamp
1/8" perforated back-up tube available, must specify when ordering
Bevel seat, I-line and weld ends available, call JGB for information