Mi-T-M Corporation
AGW Series Two Stage Gasoline Air Compressor/Generator/Welder Combination
Equipment Category:
Air Compressor / Generator / Welders
The AGW Series is designed for the contractor who needs power and welding capabilities. With Mi-T-M’s flexible installation, the AGW Series can be mounted with or without the tank on the back of a service truck, work trailer or in your shop to operate air tools, power lights or weld.
Generator Mode
- AC current only
- Selector switch set to idle down
- Switch is set to full throttle
Welder Mode
- DC current only
- Engine must be running full throttle
- Selector switch must be set to full throttle
Compressor Pump
- Splash lubricated
- Stainless-steel braided discharge hose
- Large canister intake filter
- Oil level sight indicator
Generator
- Brush-type 2 pole 120V/240V alternator
- Total harmonic distortion (THD) less than 6%
- 100% copper windings
Welder
- Amperage selection switch, 170A or 220A maximum
Frame
- Powder coated ASME coded receiver tanks (not available on AGW-SR14-B)
- 16-gauge powder coated belt guard (14-gauge on AGW-SH22-20M)
Components
- Regulator and two gauges for tank and outlet pressure
- 16.5-inch fly wheel
- Manual drain valves for proper maintenance
Type:
Two Stage Gasoline Air Compressor/Generator/Welder Combination
MODEL NO. |
AGW-SH22-20M |
AGW-SR14-30M |
AGW-SR14-B |
ENGINE | |||
DISPLACEMENT/ENGINE | 688cc Honda OHV with electric start - cables are included; battery not included | 404cc Subaru OHC with electric start - battery and cables not included | 404cc Subaru OHC with electric start - battery and cables not included |
RATED SPEED | 3600 RPM | 3600 RPM | 3600 RPM |
COMPRESSOR | |||
CFM @ 90 PSI | 30.5 | 16.4 | 16.4 |
CFM @ 175 PSI * | 29.0 | 15.7 | 15.7 |
COMPRESSOR | Two stage, cast iron | Two stage, cast iron | Two stage, cast iron |
TANK SIZE | 20-gallon receiver tank | 30-gallon receiver tank | Not applicable – base-mount model |
GENERATOR | |||
MAX. AC OUTPUT | 5000 watts | 5000 watts | 5000 watts |
RATED AC OUTPUT | 4500 watts | 4500 watts | 4500 watts |
ALTERNATOR WATTAGE CONT. ON-LOAD @ 90 PSI | 4500 watts | 3000 watts | 3000 watts |
CONT. ON-LOAD @ 175 PSI | 4500 watts | 2500 watts | 2500 watts |
FREQUENCY/VOLTAGE | 60Hz/120V/240V | 60Hz/120V/240V | 60Hz/120V/240V |
MAX. AMPS (120V/240V) | 41.5/20.8 | 41.7/20.8 off-load | 41.7/20.8 off-load |
CONT. AMPS (120V/240V) | 37.5/18.8 | 35.7/18.7 off-load | 35.7/18.7 off-load |
RECEPTACLES | (2) 120V, 20A GFCI duplex (1) 120V/240V, 20A twist lock | (2) 120V, 20A GFCI duplex (1) 120V/240V, 20A twist lock | (2) 120V, 20A GFCI duplex (1) 120V/240V, 20A twist lock |
WELDER | |||
DUTY CYCLE (10 MIN. RUN TIME) | 220A @ 40%, 190A @ 60%, 150A @ 100% | 150A @ 100% | 150A @ 100% |
DC VOLTAGE | 50-220A working range | 50-170A working range | 50-170A working range |
MISCELLANEOUS | |||
FUEL TANK | 10-gallon | 1.85-gallon | 1.85-gallon |
DIMENSIONS (LxWxH) | 47x24x50in. | 46x22x47in. | 49x22x28.5in. |
NET WT. | 803 lb. | 585 lb. | 384 lb. |
Request Quote | |||
Request a Quote | Request Quote | Request Quote | Request Quote |
* Equipped with 150-PSI maximum rated regulator