Mi-T-M Corporation
Job Site Series Kerosene Indirect Ductable Portable Heaters
Equipment Category:
Portable Heaters
The Job Site Series of kerosene indirect heaters provide 100% clean, dry heat for buildings and construction sites.
Frame
- Powder coated steel frame, handle and tank
Burner
- Direct spark ignition
Components
- Suitable for air ducting
- Electronic flame control
- Automatic ignition
- Automatic fuel shut-off
For use in construction sites and applications where the heat will be ducted into a building.
Factory tested for multiple fuels:
–Kerosene
–No. 1 and No. 2 fuel oil
Type:
Kerosene Indirect Ductable Portable Heater
MODEL NO. |
MH-0092-0MIH |
MH-0125-0MIH |
MH-0300-0MIH |
HEAT OUTPUT | 92,000 BTU | 125,000 BTU | 300,000 BTU |
HOT-AIR FLOW | 557 CFM | 1,180 CFM | 2,650 CFM |
AC POWER | 115V, 60Hz, 1Ø, 4.0 Amps | 115V, 60Hz, 1Ø, 7.0 Amps | 115V, 60Hz, 1Ø, 12.5 Amps |
POWER CONSUMPTION |
250 watts | 460 watts | 800 watts |
FAN STATIC PRESSURE |
0.5in. WC | 0.7in. WC | 0.8in. WC |
FUEL TANK CAPACITY |
12.0 gallons | 14.0 gallons | 36.0 gallons |
FUEL CONSUMPTION |
0.66 gal./hr. | 0.9 gal./hr. | 2.1 gal./hr. |
FUEL PUMP | No | Yes, high pressure | Yes, high pressure |
FUEL FILTER | No | Yes, heated for reliable starts | Yes, heated for reliable starts |
TEMPERATURE RISE |
120°F | 130°F | 130°F |
MAX. OUTPUT TEMPERATURE |
240°F | 240°F | 240°F |
MAX OPERATING HOURS |
18.0 hours | 15.5 hours | 17.0 hours |
MAX. DUCT SIZE (LxDIAMETER) |
15ft.x12in. | 25ft.x12in. | 25ft.x18in. |
DIMENSIONS (LxWxH) |
36.6x22.1x24.6in. | 47x24x31in. | 68x29.5x40.4in. |
NET WT. | 88 lb. | 154 lb. | 282 lb. |
Request a Quote | Request Quote | Request Quote | Request Quote |
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.
Please see heater "Owner’s Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.