Goulds Water Technology
16SE0511 Multi-Stage Booster Effluent Pump-SE Series
Equipment Category:
Effluent Pumps - Wastewater & Drainage Pumps
Request Quote
For potable water booster and filtered effluent service multi-stage, bottom-inlet, high head submersibles.
Features
-
Casing is AISI 304 SS corrosion resistant, non-toxic, non-leaching
-
FDA compliant, glass filled Noryl impeller. Corrosion and abrasion resistant
-
Mechanical seal has silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber
-
BUNA-N elastomers
-
Suction strainer and motor shell are constructed of AISI type 304 series stainless steel
-
AISI type 304 stainless steel high strength keyed pump shaft with impeller locking cap screw
-
1-1⁄4" NPT vertical discharge connection.
-
Suction strainer is detachable for easy clean out
|
Specifications
Horsepower |
1/2 HP |
Voltage |
115 volts |
Phase |
1 |
Frequency |
60 Hz |
Speed |
3450 RPM |
Max. Current |
9 Amps |
Design |
Multi-stage/bottom stage |
Discharge Connection |
1-1/4" NPT |
Suction Connection |
Open |
Maximum Capacity |
24 GPM |
Maximum TDH |
145 ft. |
Max. Solid Size |
1/8" |
Max. Submergence |
65 ft. |
Stages |
3 |
Impeller Material |
Noryl |
Pump Casing Material |
Stainless steel |
Motor Casing Material |
Stainless steel |
Motor Shaft Material |
Stainless steel |
Shaft Seal |
Silicon/Carbide/Stainless steel/BUNA-N |
Overload Protection |
Yes |
Max. Temperature (Continuous) |
104°F |
Max. Temperature (Intermittent) |
140°F |
Cord Type |
16 AWG w/ bare leads |
Cord Length |
10 ft. |