Goulds Water Technology
HSJ10N Multi-Stage Convertible Pump
Equipment Category:
Convertible Jet Pumps - Jet Pumps
Request Quote
1 HP - 115/230 Volt - 2 Stage - Multi-Stage Convertible Pump
Features
- High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
- Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
- Easy to Service: Can be taken apart for service by removing four bolts.
- Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electrocoat paint process applied inside and out and then baked on.
- Powered for Continuous Operation: Pump is designed for continuous operation. All ratings are within the motor manufacturer's recommended working limits.
- Convertible: Designed for use on shallow or deep well applications using appropriate Goulds Pumps fittings. See the performance charts on the following pages for fitting order numbers.
|
Applications
- Homes
- Farms
- Booster Service
|
Motors:
- NEMA standard.
- 3/4 - 1 1/2 HP Ò 115/230 V
- 2 HP Ò 230 V only
- 60 Hz, capacitor start.
- Single phase, 3500 RPM.
- Built-in overload with automatic reset.
- Stainless steel shaft.
- Rotation: clockwise when viewed from motor end.
|
Pump:
- Pipe connections:
- 1 1/4 NPT suction, 1 NPT discharge
- 1 NPT drive (pressure)
- Pressure switch:
- 3/4 - 1 1/2HP, AS4; 2 HP, AS10
- both preset (30-50 PSI)
|
